Re: Can not get remote engineTime.

*Dave,*
*
*
*Thanks so much for your time.*
*
*
*We are using the net-snmp release from Redhat*
*Red Hat Enterprise Linux Server release 5.3 (Tikanga)*
*
*
*Below is the configuration options*
*
net-snmp-config --configure-options
*
*
'--build=x86_64-redhat-linux-gnu' '--host=x86_64-redhat-linux-gnu'
'--target=x86_64-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr'
'--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin'
'--datadir=/usr/share' '--includedir=/usr/include/net-snmp'
'--libdir=/usr/lib64' '--libexecdir=/usr/libexec' '--localstatedir=/var'
'--sharedstatedir=/usr/com' '--mandir=/usr/share/man'
'--infodir=/usr/share/info' '--enable-static' '--enable-shared'
'--with-cflags=-O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions
-fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -g -lcrypto
-DNETSNMP_NO_INLINE' '--with-ldflags=-L/usr/lib64'
'--with-sys-location=Unknown' '--with-logfile=/var/log/snmpd.log'
'--with-persistent-directory=/var/net-snmp' '--with-mib-modules=host agentx
smux          ucd-snmp/diskio tcp-mib udp-mib mibII/mta_sendmail
 ip-mib/ipv4InterfaceTable ip-mib/ipv6InterfaceTable
 ip-mib/ipAddressPrefixTable/ipAddressPrefixTable
 ip-mib/ipDefaultRouterTable/ipDefaultRouterTable
 ip-mib/ipv6ScopeZoneIndexTable ip-mib/ipIfStatsTable sctp-mib
ucd-snmp/lmSensors disman/event-mib' '--with-libwrap=/usr/lib64'
'--sysconfdir=/etc' '--enable-ipv6' '--enable-ucd-snmp-compatibility'
'--with-openssl' '--with-pic' '--enable-embedded-perl'
'--enable-mfd-rewrites' '--enable-local-smux'
'--with-sys-contact=root@localhost' 'CFLAGS=-O2 -g -pipe -Wall
-Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector
--param=ssp-buffer-size=4 -m64 -mtune=generic' 'LDFLAGS=-L/usr/lib64'
'build_alias=x86_64-redhat-linux-gnu' 'host_alias=x86_64-redhat-linux-gnu'
'target_alias=x86_64-redhat-linux-gnu'
*

Zongjun

On Tue, Mar 1, 2011 at 1:30 AM, Dave Shield <[email protected]>wrote:

> On 28 February 2011 19:20, Zongjun <[email protected]> wrote:
> > Besides our own MIB definitions, it outputs
> > SNMP-VIEW-BASED-ACM-MIB::vacmGroupName.1."public" = STRING: public
> > SNMP-VIEW-BASED-ACM-MIB::vacmGroupName.2."public" = STRING: public
> > SNMP-VIEW-BASED-ACM-MIB::vacmGroupName.3."public" = STRING: grppublic
>    <etc>
>
> That's all?   Nothing else?   Not even the system group?   Boggle!
>
> As far as I can tell from that list, you should be able to see everything
> (and it *does* look like a Net-SNMP agent)
>
>
> >> Either:
> >>    -  the agent has been compiled with a *very* restricted set of MIBs
> >
> > How to specify this?
>
> This would be specified using the "configure" command when first
> compiling the agent.   Something like
>
>    ./configure --enable-mini-agent --with-out-mib-modules="xxx,yyy,..."
>
> But I'm amazed that there is so little visible in the tree.
> I can't believe that someone would remove things like the system
> tree and the usmUser table,   but leave the vacm table accessible.
>
>
> Something very strange is happening here.
>
>
> Is this an agent that you compiled yourself, or a vendor-supplied
> agent, or what?
>
> Is there a command "net-snmp-config" on this system?
> If so, what does
>      net-snmp-config --configure-options
>               report?
>
> Dave
>

------------------------------------------------------------------------------
What You Don't Know About Data Connectivity CAN Hurt You
This paper provides an overview of data connectivity, details
its effect on application quality, and explores various alternative
solutions. http://p.sf.net/sfu/progress-d2d

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users