Re: problems while querying an HP blade enclosure

Thanks for replying,

I'm getting this when doing snmpwalk using the enterprise oid

[root@admin ~]# snmpwalk –v1 –c ammeon 10.44.84.33 1.3.6.1.4.1.232
–c: Unknown Object Identifier (Sub-id not found: (top) -> –c)
[root@admin ~]#

Where is the problem? is it in the target (blade enclosure) or the host
from where I run the snmpwalk command?


On 1 November 2011 20:52, Alexandre James <[email protected]> wrote:

>  I believe if you don’t pass an oid to snmp walk it will only want the
> mib-2 tree (1.3.6.1.2) where the CPQRACK-MIB is an enterprise mib so it’s
> under the enterprise tree (1.3.6.1.4.1). More specifically, if do something
> link the following, you should only get the contents of the CPQRACK-MIB:**
> **
>
> ** **
>
> snmpwalk –v1 –c ammeon 10.44.84.33 1.3.6.1.4.1.232****
>
> ** **
>
> *From:* Daniel Sanabria [mailto:[email protected]]
> *Sent:* Tuesday, November 01, 2011 11:00 AM
> *To:* [email protected]
> *Subject:* problems while querying an HP blade enclosure****
>
> ** **
>
> Hi, ****
>
>
> We're looking to look after our HP blade enclosure using net-snmp
> utilities installed in one of our linux servers ( NET-SNMP version:  5.5,
> RHEL 6.10). I've obtained the relevant  set of MIB files from a HP source
> and I think I've exported/uploaded these correctly on the host from where
> I'm  currently running my snmpget commands, but I'm getting the following
> error when trying to get values from the Enclosure:
>
> [root@admin mibs]# snmpget -v1 -c ammeon 10.44.84.33
> CPQRACK-MIB::cpqRackServerBladePowered
> Error in packet
> Reason: (noSuchName) There is no such variable name in this MIB.
> Failed object: CPQRACK-MIB::cpqRackServerBladePowered
>
> [root@admin mibs]# snmptranslate -TB 'cpqRackServerBladePowered'
> CPQRACK-MIB::cpqRackServerBladePoweredOff
> CPQRACK-MIB::cpqRackServerBladePoweredOn
> CPQRACK-MIB::cpqRackServerBladePowered
> [root@admin mibs]#
>
> An snmpwalk is reporting back a number of variables/counters but none from
> CPQRACK-MIB:
>
> [root@admin mibs]# snmpwalk -v1 -c ammeon 10.44.84.33
> SNMPv2-MIB::sysDescr.0 = STRING: HP Onboard Administrator
> SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.11.5.7.1.2
> DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (295131) 0:49:11.31
> SNMPv2-MIB::sysContact.0 = STRING: Daniel Sanabria
> SNMPv2-MIB::sysName.0 = STRING: atc7000-71oa1
> SNMPv2-MIB::sysLocation.0 = STRING: Athlone Lab
> SNMPv2-MIB::sysORLastChange.0 = Timeticks: (385) 0:00:03.85
> SNMPv2-MIB::sysORID.1 = OID: SNMPv2-MIB::snmpMIB
> SNMPv2-MIB::sysORID.2 = OID: TCP-MIB::tcpMIB
> SNMPv2-MIB::sysORID.3 = OID: RFC1213-MIB::ip
> SNMPv2-MIB::sysORID.4 = OID: UDP-MIB::udpMIB
>
> .
> .
> .
>
>
>  Any ideas on what I might be doing wrong here ? :(
>
> Thanks in advance,
>
> Daniel****
>
> ** **
>

------------------------------------------------------------------------------
RSA&#174; Conference 2012
Save $700 by Nov 18
Register now&#33;
http://p.sf.net/sfu/rsa-sfdev2dev1

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users