trap destinations

I am using net-snmp ver5.7.1 and config snmpd as a master agent and using my app as a sub agent.
I am working on ARM linux and compile net-snmp on version 2.
on snmpd.conf file I added "trapsink  192.168.0.5"
it means I want to send traps to 192.168.0.5.
when I run snmpd and then my subagent it works and I can send traps on sub agent to 192.168.0.5
and manager will receive all traps.

in that case I can read by MG-soft these tables:


snmpTargetAddrTable:

Instance  ----------->internal0     
snmpTargetAddrName(IDX, IMP) ----------->Not accessible
snmpTargetAddrTDomain ----------->snmpUDPDomain
snmpTargetAddrTAddress -----------> C0.A8.00.05.00.A2 (hex)
snmpTargetAddrTimeout----------->0
snmpTargetAddrRetryCount----------->0 
snmpTargetAddrTagList ----------->internal0 
snmpTargetAddrParams ----------->internal0
snmpTargetAddrStorageType----------->readOnly(5)
snmpTargetAddrRowStatus -----------> active(1)  


snmpTargetParamsTable:

Instance -----------> internal0
snmpTargetParamsName(IDX, IMP)----------->Not accessible
snmpTargetParamsMPModel----------->0
snmpTargetParamsSecurityModel----------->1
snmpTargetParamsSecurityName----------->public
snmpTargetParamsSecurityLevel----------->noAuthNoPriv(1)
snmpTargetParamsStorageType----------->readOnly(5)
snmpTargetParamsRowStatus----------->active(1)


snmpNotifyTable:

Instance -----------> internal0
snmpNotifyName(IDX, IMP) ----------->Not accessible 
snmpNotifyTag ----------->internal0
snmpNotifyType ----------->trap(1)
snmpNotifyStorageType ----------->readOnly(5)
snmpNotifyRowStatus ----------->active(1)

when I want to change destination address of traps remotely without restarting snmpd ,I have some problems.
one problem is, I can not remove row from snmpTargetParamsTable and snmpTargetAddrTable
when I removed snmpNotifyTable row by snmpNotifyRowStatus ----------->destroy(6),I can not received any traps.
(as I expected). but when i want to add that row again I have some problem:
my sequence is:
1 -snmpNotifyRowStatus ----------->(5)
2-
Instance -----------> internal0
snmpNotifyName(IDX, IMP) ----------->Not accessible 
snmpNotifyTag ----------->internal0
snmpNotifyType ----------->trap(1)
snmpNotifyStorageType ----------->readOnly(5)

I can not write snmpNotifyStorageType >readOnly(5) 
but I can write snmpNotifyStorageType >other(1) 

3_
snmpNotifyRowStatus ----------->active(1)

in that case still I can not receive any traps.
for adding new destination address I added rows like that with replacing "internal0 to ext0" and "C0.A8.00.05.00.A2 (hex) to C0.A8.00.06.00.A2 (hex)".
(192.168.0.6)but nothing happened again.

I am really confused what should I do,
I have read lots of docs ,is there any thing wrong .

thanks
mansour

------------------------------------------------------------------------------
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second 
resolution app monitoring today. Free.
http://p.sf.net/sfu/Boundary-dev2dev

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users