Debugging SNMP

Hello, me again. Have been sending a few messages lately. Hope I am not nagging to much. 



Is there a way I could debug snmp. I have gotten my C++ program to work as an SNMP AgentX. I have managed to register 3 hard coded test scalars and it works when I snmpget on those scalars. 


Thus removing these hard coded scalars I then try to add my own scalars. 
const char *buffy = group_name.c_str(); 
netsnmp_register_scalar_group( 
netsnmp_create_handler_registration(buffy, 
handle_snmp, 
group_oid, 
OID_LENGTH(group_oid), 
HANDLER_CAN_RONLY 
), 1, scalars_total); //up to the max number of scalars in this group 




When I try to snmpget on scalars I just get: 

SNMPv2-SMI::enterprises.40463.2.1.0 = No Such Object available on this agent at this OID 



I know I have a scalar group of OID 1.3.6.1.4.1.40463.2 which have 8 scalars. After I have registered all my scalars is there a way to check if there really is any scalars registered and which ones? 



Content of net-snmp.log. This is actually alot for only one snmpget. The last 3 lines continues every few seconds. 

agentx/master: transport connect on session 0x7fdf24cd7840 
agentx/master: handle pdu (req=0x48a4f838,trans=0x0,sess=0x0) 
agentx/master: open 0x7fdf24cd7840 
agentx/master: opened 0x7fdf24cd75b0 = 57 with flags = a0 
agentx/master: send response, stat 0 (req=0x48a4f838,trans=0x0,sess=0x0) 
agentx_build: packet built okay 
agentx/master: handle pdu (req=0x48a4f839,trans=0x0,sess=0x39) 
agentx/master: in register_agentx_list 
agentx/master: registered ok 
agentx/master: send response, stat 0 (req=0x48a4f839,trans=0x0,sess=0x39) 
agentx_build: packet built okay 
Connection from UDP: [127.0.0.1]:48784->[127.0.0.1]:161 
agentx/master: handle pdu (req=0x48a4f83a,trans=0x0,sess=0x39) 
agentx/master: send response, stat 0 (req=0x48a4f83a,trans=0x0,sess=0x39) 
agentx_build: packet built okay 
agentx/master: handle pdu (req=0x48a4f83b,trans=0x0,sess=0x39) 
agentx/master: send response, stat 0 (req=0x48a4f83b,trans=0x0,sess=0x39) 
agentx_build: packet built okay 
agentx/master: handle pdu (req=0x48a4f83c,trans=0x0,sess=0x39) 
agentx/master: send response, stat 0 (req=0x48a4f83c,trans=0x0,sess=0x39) 
agentx_build: packet built okay 
agentx/master: handle pdu (req=0x48a4f83d,trans=0x0,sess=0x39) 
agentx/master: send response, stat 0 (req=0x48a4f83d,trans=0x0,sess=0x39) 
agentx_build: packet built okay 



CONFIDENTIALITY
This e-mail and any attachment contain KONGSBERG information which may be 
proprietary, confidential or subject to export regulations, and is only meant 
for the intended recipient(s). Any disclosure, copying, distribution or use is 
prohibited, if not otherwise explicitly agreed with KONGSBERG. If received in 
error, please delete it immediately from your system and notify the sender 
properly.

------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_sfd2d_oct

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users