Re: regarding bridge-mib in linux

when I search for "snmp-brige-mib" using locate command, I got the output as


[root@test Downloads]# locate snmp-bridge-mib
/usr/bin/snmp-bridge-mib
/usr/share/man/man1/snmp-bridge-mib.1.gz


but still I was getting the reply to the command

snmpgetnext -v1 -c 'public' 127.0.0.1 1.3.6.1.2.1.17.3

as

HOST-RESOURCES-MIB::hrSystemUptime.0 = Timeticks: (9178749) 1 day, 1:29:47.49


and not the expected bridge-mib output.

I also tried to apply the patches given in the link provided by you, first patch gave following output 

patching file bridge-mib.h
patching file common_linux.c
patching file common_linux.h
patching file fdb.h
patching file fdb_linux.c
patching file ports.h
patching file ports_linux.c
patching file scalars.h
patching file scalars_linux.c
patching file dot1dBasePortTable.h
patching file dot1dBasePortTable.c
The next patch would create the file dot1dBasePortTable.h,
which already exists!  Assume -R? [n] y
patching file dot1dBasePortTable.h
Hunk #1 FAILED at 1.
File dot1dBasePortTable.h is not empty after patch, as expected
1 out of 1 hunk FAILED -- saving rejects to file dot1dBasePortTable.h.rej
patching file dot1dBasePortTable_data_access.c
patching file dot1dBasePortTable_data_access.h
patching file dot1dBasePortTable_data_get.c
patching file dot1dBasePortTable_data_get.h
patching file dot1dBasePortTable_data_set.c
patching file dot1dBasePortTable_data_set.h
patching file dot1dBasePortTable_enums.h
patching file dot1dBasePortTable_interface.c
patching file dot1dBasePortTable_interface.h
patching file dot1dBasePortTable_oids.h
patching file dot1dBridge.c
patching file dot1dBridge.h
patching file dot1dBridge_scalars.c
patching file dot1dBridge_scalars.h
patching file dot1dStpPortTable.h
patching file dot1dStpPortTable.c
The next patch would create the file dot1dStpPortTable.h,
which already exists!  Assume -R? [n] y
patching file dot1dStpPortTable.h
Hunk #1 FAILED at 1.
File dot1dStpPortTable.h is not empty after patch, as expected
1 out of 1 hunk FAILED -- saving rejects to file dot1dStpPortTable.h.rej
patching file dot1dStpPortTable_data_access.c
patching file dot1dStpPortTable_data_access.h
patching file dot1dStpPortTable_data_get.c
patching file dot1dStpPortTable_data_get.h
patching file dot1dStpPortTable_data_set.c
patching file dot1dStpPortTable_data_set.h
patching file dot1dStpPortTable_enums.h
patching file dot1dStpPortTable_interface.c
patching file dot1dStpPortTable_interface.h
patching file dot1dStpPortTable_oids.h
patching file dot1dTpFdbTable.h
patching file dot1dTpFdbTable.c
The next patch would create the file dot1dTpFdbTable.h,
which already exists!  Assume -R? [n] y
patching file dot1dTpFdbTable.h
Hunk #1 FAILED at 1.
File dot1dTpFdbTable.h is not empty after patch, as expected
1 out of 1 hunk FAILED -- saving rejects to file dot1dTpFdbTable.h.rej
patching file dot1dTpFdbTable_data_access.c
patching file dot1dTpFdbTable_data_access.h
patching file dot1dTpFdbTable_data_get.c
patching file dot1dTpFdbTable_data_get.h
patching file dot1dTpFdbTable_data_set.c
patching file dot1dTpFdbTable_data_set.h
patching file dot1dTpFdbTable_enums.h
patching file dot1dTpFdbTable_interface.c
patching file dot1dTpFdbTable_interface.h
patching file dot1dTpFdbTable_oids.h
patching file dot1dTpPortTable.h
patching file dot1dTpPortTable.c
The next patch would create the file dot1dTpPortTable.h,
which already exists!  Assume -R? [n] y
patching file dot1dTpPortTable.h
Hunk #1 FAILED at 1.
File dot1dTpPortTable.h is not empty after patch, as expected
1 out of 1 hunk FAILED -- saving rejects to file dot1dTpPortTable.h.rej
patching file dot1dTpPortTable_data_access.c
patching file dot1dTpPortTable_data_access.h
patching file dot1dTpPortTable_data_get.c
patching file dot1dTpPortTable_data_get.h
patching file dot1dTpPortTable_data_set.c
patching file dot1dTpPortTable_data_set.h
patching file dot1dTpPortTable_enums.h
patching file dot1dTpPortTable_interface.c
patching file dot1dTpPortTable_interface.h
patching file dot1dTpPortTable_oids.h

please help?




________________________________
 From: Vincent Bernat <[email protected]>
To: Akshat Kakkar <[email protected]> 
Cc: "[email protected]" <[email protected]> 
Sent: Wednesday, 26 December 2012 11:37 PM
Subject: Re: regarding bridge-mib in linux
 
❦ 26 décembre 2012 10:54 CET, Akshat Kakkar <[email protected]> :

> How can I get BRIDGE-MIB implementation in linux ?

It is already shipped as an AgentX subagent in NetSNMP. Search for
"snmp-bridge-mib". Alternatively, I have made a patch to include it in
Net-SNMP:
http://sourceforge.net/p/net-snmp/patches/1242/
-- 
# Basic IBM dingbats, some of which will never have a purpose clear
# to mankind
    2.4.0 linux/drivers/char/cp437.uni

------------------------------------------------------------------------------
Master Visual Studio, SharePoint, SQL, ASP.NET, C# 2012, HTML5, CSS,
MVC, Windows 8 Apps, JavaScript and much more. Keep your skills current
with LearnDevNow - 3,200 step-by-step video tutorials by Microsoft
MVPs and experts. ON SALE this month only -- learn more at:
http://p.sf.net/sfu/learnmore_122712

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users