RE: send a snmp trap
"andrewarnier" <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
Hi all, I want to send a snmp trap by snmptrap and shown the device name in snmptt.log ,for example Wed Mar 19 15:18:39 2014 .1.3.6.1.4.1.3607.6.10.30.0.220 Critical "CISCO" CISCO-13000 - .1.3.6.1.4.1.3607.6.10.30.0.220 CISCO-13000 Carrier Loss On The LAN in testFAC-1-2 (majorServiceAffecting),ifIndex=16386 Not shown the ip Wed Mar 19 15:18:39 2014 .1.3.6.1.4.1.3607.6.10.30.0.220 Critical " CISCO " 10.28.63.12 - .1.3607.6.10.30.0.220 10.28.63.12 Carrier Loss On The LAN in testFAC-1-2 (majorServiceAffecting),ifIndex=16386 Can anyone tell me how to do ? Andrew From: [email protected] [mailto:[email protected]] Sent: Wednesday, April 09, 2014 3:24 AM To: andrewarnier; [email protected] Subject: RE: send a snmp trap Andrew, Your oght to be seeing some errors from your command. Assuming that 192.168.3.45 is your management statation and CISCO-13000 is the device, that device name needs to be a resolvable name or an IP. For example: $ snmptrap -v1 -c 506 10.228.70.123 .1.3.6.1.4.1.3607.6.10.30 CISCO-13000 6 3540 15 getaddrinfo: CISCO-13000 Name or service not known unknown host: CISCO-13000 $ If I change the agent tot something resolvable: $ snmptrap -v1 -c 506 10.228.70.123 .1.3.6.1.4.1.3607.6.10.30 <http://www.google.com> www.google.com 6 3540 15 $ You should be getting errors on stderr when you run your command. -------- Original Message -------- Subject: send a snmp trap From: "andrewarnier" < <mailto:[email protected]> [email protected]> Date: Tue, April 08, 2014 12:59 am To: < <mailto:[email protected]> [email protected]> Hi all, I try to send a snmp trap to my system, the example as follows, snmptrap -v 1 -c public 192.168.3.45 .1.3.6.1.4.1.3607.6.10.30 CISCO-13000 6 3540 15 \ .1.3.6.1.4.1.3607.6.10.100.10.20.1 s "20080227205807S" \ .1.3.6.1.4.1.3607.6.10.20.30.20.1.80.4103.220 s "90" \ .1.3.6.1.4.1.3607.6.10.20.30.20.1.20.4103.220 s "670" \ .1.3.6.1.4.1.3607.6.10.20.30.20.1.60.4103.220 s "16386" \ .1.3.6.1.4.1.3607.6.10.20.30.20.1.30.4103.220 s "4" \ .1.3.6.1.4.1.3607.6.10.20.30.20.1.40.4103.220 s "10" \ .1.3.6.1.4.1.3607.6.10.20.30.20.1.50.4103.220 s "0" \ .1.3.6.1.4.1.3607.6.10.20.30.20.1.100.4103.220 s "testFAC-3-4" And I check the log #tail –f /var/log/snmptt/snmptt.log But it’s didn’t shown in the log Can anyone tell me what is wrong with the trap? Thanks, Andrew _____ ------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. <http://p.sf.net/sfu/13600_Cloudbees> http://p.sf.net/sfu/13600_Cloudbees _____ _______________________________________________ Net-snmp-users mailing list <mailto:[email protected]> [email protected] Please see the following page to unsubscribe or change other options: <https://lists.sourceforge.net/lists/listinfo/net-snmp-users> https://lists.sourceforge.net/lists/listinfo/net-snmp-users ------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users