RE: snmpset syntax using string which is a textfile
"Paul J. Martijn" <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <[email protected]> |
Hi, I am trying to load a textfile into a Cisco router using SNMPSET. On SunOS or some other unix flavours I can create a file i.e. snmpset.template, copy this to the /tftpboot folder and execute the command using the syntax below. However when executing this on linux, I get an errormsg: [root@linux tftpboot]$ /usr/bin/snmpset -t 5 -M /usr/share/snmp/mibs 10.102.53.234 -c "snmprw" .1.3.6.1.4.1.9.2.1.50.212.239.44.252 s snmpset.template s: Needs value I tried using quotes, dash etc, but no luck. Is this a bug or a wrong syntax? Below the version I am using. [root@linux$ /tftpboot]$ snmpset /help Missing object name USAGE: snmpset [OPTIONS] AGENT OID TYPE VALUE [OID TYPE VALUE]... Version: 5.3.2.2 Web: http://www.net-snmp.org/ Email: [email protected] OPTIONS: -h, --help display this help message -H display configuration file directives understood -v 1|2c|3 specifies SNMP version to use -V, --version display package version number SNMP Version 1 or 2c specific -c COMMUNITY set the community string SNMP Version 3 specific -a PROTOCOL set authentication protocol (MD5|SHA) -A PASSPHRASE set authentication protocol pass phrase -e ENGINE-ID set security engine ID (e.g. 800000020109840301) -E ENGINE-ID set context engine ID (e.g. 800000020109840301) -l LEVEL set security level (noAuthNoPriv|authNoPriv|authPriv) -n CONTEXT set context name (e.g. bridge1) -u USER-NAME set security name (e.g. bert) -x PROTOCOL set privacy protocol (DES|AES) -X PASSPHRASE set privacy protocol pass phrase -Z BOOTS,TIME set destination engine boots/time General communication options -r RETRIES set the number of retries -t TIMEOUT set the request timeout (in seconds) Debugging -d dump input/output packets in hexadecimal -D[TOKEN[,...]] turn on debugging output for the specified TOKENs (ALL gives extremely verbose debugging output) General options -m MIB[:...] load given list of MIBs (ALL loads everything) -M DIR[:...] look in given list of directories for MIBs -P MIBOPTS Toggle various defaults controlling MIB parsing: u: allow the use of underlines in MIB symbols c: disallow the use of "--" to terminate comments d: save the DESCRIPTIONs of the MIB objects e: disable errors when MIB symbols conflict w: enable warnings when MIB symbols conflict W: enable detailed warnings when MIB symbols conflict R: replace MIB symbols from latest module -O OUTOPTS Toggle various defaults controlling output display: 0: print leading 0 for single-digit hex characters a: print all strings in ascii format b: do not break OID indexes down e: print enums numerically E: escape quotes in string indices f: print full OIDs on output n: print OIDs numerically q: quick print for easier parsing Q: quick print with equal-signs s: print only last symbolic element of OID S: print MIB module-id plus last element t: print timeticks unparsed as numeric integers T: print human-readable text along with hex strings u: print OIDs using UCD-style prefix suppression U: don't print units v: print values only (not OID = value) x: print all strings in hex format X: extended index format -I INOPTS Toggle various defaults controlling input parsing: b: do best/regex matching to find a MIB node h: don't apply DISPLAY-HINTs r: do not check values for range/type legality R: do random access to OID labels u: top-level OIDs must have '.' prefix (UCD-style) s SUFFIX: Append all textual OIDs with SUFFIX before parsing S PREFIX: Prepend all textual OIDs with PREFIX before parsing -L LOGOPTS Toggle various defaults controlling logging: e: log to standard error o: log to standard output n: don't log at all f file: log to the specified file s facility: log to syslog (via the specified facility) (variants) [EON] pri: log to standard error, output or /dev/null for level 'pri' and above [EON] p1-p2: log to standard error, output or /dev/null for levels 'p1' to 'p2' [FS] pri token: log to file/syslog for level 'pri' and above [FS] p1-p2 token: log to file/syslog for levels 'p1' to 'p2' -C APPOPTS Set various application specific behaviours: q: don't print results on success TYPE: one of i, u, t, a, o, s, x, d, b, n i: INTEGER, u: unsigned INTEGER, t: TIMETICKS, a: IPADDRESS o: OBJID, s: STRING, x: HEX STRING, d: DECIMAL STRING, b: BITS U: unsigned int64, I: signed int64, F: float, D: double Kind regards, Paul-; ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users