Re: Local snmpwalk fails with Unknown Object Identifier

Hello,

here some additional infos:

If I snmpwalk via the OID Number it is also working:

snmpwalk -v3 -m ALL -M /home/graute/snmp/mibs -n "" -u admin -a SHA -A
"12345678" -x AES -X "12345678" -l authPriv 127.0.0.1 1.3.6.1.2.1

And I see this:
snmpwalk -v3 -m ALL -M /home/graute/snmp/mibs -n "" -u admin -a SHA -A
"12345678" -x AES -X "12345678" -l authPriv 127.0.0.1 1.3.6.1.2.1
.1.3.6.1.2.1.1.1.0 = STRING: "TAINY-iQ"
.1.3.6.1.2.1.1.2.0 = OID: .1.3.6.1.4.1.8072.3.2.10
.1.3.6.1.2.1.1.3.0 = Timeticks: (148116) 0:24:41.16
.1.3.6.1.2.1.1.4.0 = STRING: "[email protected]"
.1.3.6.1.2.1.1.5.0 = STRING: "TAINY-iQ"
.1.3.6.1.2.1.1.6.0 = STRING: "Dr. Neuhaus Telekommunikation GmbH"
.1.3.6.1.2.1.1.8.0 = Timeticks: (29) 0:00:00.29
.1.3.6.1.2.1.1.9.1.2.1 = OID: .1.3.6.1.6.3.11.3.1.1
.1.3.6.1.2.1.1.9.1.2.2 = OID: .1.3.6.1.6.3.15.2.1.1
.1.3.6.1.2.1.1.9.1.2.3 = OID: .1.3.6.1.6.3.10.3.1.1
.1.3.6.1.2.1.1.9.1.2.4 = OID: .1.3.6.1.6.3.1
......

But the same via the MIB is still not working:

snmpwalk -v3 -m ALL -M /home/graute/snmp/mibs -n "" -u admin -a SHA -A
"12345678" -x AES -X "12345678" -l authPriv 127.0.0.1 system.0
system.0: Unknown Object Identifier (system.0)

Best regards,

Oliver

On Tue, Jun 23, 2015 at 3:14 PM, Oliver Graute <[email protected]> wrote:
> Hello,
>
> I observe a strange problem with net-snmp while retrieving a subtree
> with snmpwalk:
>
> On the Target Host itself I got a Unknown Object Identifier Error Message..
>
> snmpwalk -v3 -m ALL -M /usr/share/snmp/mibs -n "" -u admin -a SH
> A -A "12345678" -x AES -X "12345678" -l authPriv localhost TAINY-MIB::tainyMIBOb
> jects
> TAINY-MIB::tainyMIBObjects: Unknown Object Identifier
> (TAINY-MIB::tainyMIBObjects)
>
> The same command from a Remote Host to the Target is working like expecting:
>
> snmpwalk -v3 -m ALL -M /home/graute/snmp/mibs -n "" -u admin -a SHA -A
> "12345678" -x AES -X "12345678" -l authPriv 192.168.1.8:161
> TAINY-MIB::tainyMIBObje
> cts
>
> snmpwalk -v3 -m ALL -M /home/graute/snmp/mibs -n "" -u admin -a SHA -A
> "12345678" -x AES -X "12345678" -l authPriv 192.168.1.8:161
> TAINY-MIB::tainyMIBObje
> cts
> TAINY-MIB::tainyCSQ = INTEGER: 99
> TAINY-MIB::tainyLACCID = ""
> TAINY-MIB::tainyWirelessWANIP = ""
> TAINY-MIB::tainyAccessTechnology = INTEGER: 0
> TAINY-MIB::tainyAccessTechnologyString = STRING: "Access Technology Unknown"
> TAINY-MIB::tainyWirelessNetWorkConnected = INTEGER: 0
> TAINY-MIB::tainyWirelessWANOnline = INTEGER: 0
> TAINY-MIB::tainyIMEI = ""
> TAINY-MIB::tainyIMSI = ""
> TAINY-MIB::tainyICCID = ""
> TAINY-MIB::tainyDNS1 = ""
> TAINY-MIB::tainyDNS2 = ""
> TAINY-MIB::tainyDNS3 = ""
>
> ...
>
> Some ideas whats is going wrong here?
>
> The TAINY-MIB is a self created MIB and is stored in  /usr/share/snmp/mibs
>
> /usr/bin/snmpwalk -V
> NET-SNMP version: 5.7.3
>
> Best regards,
>
> Oliver

------------------------------------------------------------------------------
Monitor 25 network devices or servers for free with OpManager!
OpManager is web-based network management software that monitors 
network devices and physical & virtual servers, alerts via email & sms 
for fault. Monitor 25 devices for free with no restriction. Download now
http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users