Re: snmptranslate doesn't show full MIB-Tree on equal Systems

On 7/15/16, [email protected] wrote
> What happens if you try it with mibReplaceWithLatest off? Found this:
> https://docs.oracle.com/cd/E18752_01/html/816-5166/snmpcmd-1m.html
> > -PR > Replace MIB objects using the last read MIB file. The parser
> replaces MIB objects in its hierarchy whenever it sees a subidentifier
> and name match. > Caution - Setting this option might result in an incorrect
> hierarchy. Can be also set with the configuration token > mibReplaceWithLatest.
> > Regards,
> Lee

I have set it to "no" on both machines, no changes.
On Server1 no problems, on server2 the same problem as before.

It seems to be really tricky.

Regards,
Venerable

2016-07-15 0:38 GMT+02:00 Lee <[email protected] >:

On 7/14/16, [email protected] <[email protected] > wrote:
> Hi Hans,
>
> Thanks for reply.
>
> The MIB files on both machines are the same.
>
> I have compiled hundreds of MIB files and copied to both machines.
>
> The MIB files from the std packages, have I moved to my home directory
> before.
>
> The snmp config files are all the same.
>
> I have also checked env, export and net-snmp-config, I can't find any
> differences.
>
> My snmp.conf looks like:
>
> mibdirs /usr/share/mibs
> mibs ALL
> showMibErrors yes
> strictCommentTerm yes
> mibAllowUnderline yes
> mibReplaceWithLatest yes
> extendedIndex yes

What happens if you try it with mibReplaceWithLatest off? Found this:
https://docs.oracle.com/cd/E18752_01/html/816-5166/snmpcmd-1m.html

-PR
Replace MIB objects using the last read MIB file. The parser
replaces MIB objects in its hierarchy whenever it sees a subidentifier
and name match.
Caution - Setting this option might result in an incorrect
hierarchy. Can be also set with the configuration token
mibReplaceWithLatest.

Regards,
Lee

> Thanks!
>
> Venerable
>
>
>
>> -----Ursprüngliche Nachricht-----
>> Von: Hans Jørgen Jakobsen
>> Gesendet: Di. 12.07.2016 18:50
>> An: [email protected]
>> Betreff: Re: snmptranslate doesn't show full MIB-Tree on equal Systems
>>
>>
>>
>> On Mon, 11 Jul 2016, [email protected] wrote:
>>
>> > For example:
>> > If I use snmptranslate -m ALL -Pu -Of .1.3.6.1.4.1.4491.2.1.6.2.1.1
>> > on Server1 then it translated me
>> .iso.org.dod.internet.private.enterprises.cableLabs.clabProject.clabProjDocsis.docsIfMCmtsMib./
>
> docsIfMCmtsConformance.docsIfMCmtsCompliances.docsIfMCmtsCoreDeviceCompliance
>> >
>> > If I use the same command on Server2 then it translated me only
>> >
>> > .iso.org.dod.internet.private.enterprises.cableLabs.clabProject.clabProjDocsis.docsIfMCmtsMib.2.1.1
>> >
>> >
>> > How can that be?
>>
>> Have you looked at what MIB files are present on both machines.
>> How has the Docsis MIB files entered the machines. They are at least on
>> my machines not part of std packages.
>> Differences in enviroment variables or (snmp) config files?
>>
>> /hjj>
>>
>> -----Ursprüngliche Nachricht Ende-----

------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity planning
reports.http://sdm.link/zohodev2dev

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users