[net-snmp] How to log traps using snmptrad daemon

Hi!

First I have to say I have no experience with SNMP traps at all, but I need
to have some trap service receiving traps from a device and logging them
into our systems so we can monitor the device.

I have the following installed:
- Windows server 2012 R2 Standard
- I downloaded this package: net-snmp-5.7-1.win32.exe

I have a vendor MIB which I placed in C:\usr\share\snmp\mibs
I think that part is fine because I could run successfully commands like
this which return the proper OID:
C:\usr\bin>snmptranslate -IR -On trapAccessAuthFail
.1.3.6.1.4.1.23629.3.1.1.11

I have registered snmptrad trap receiver with this command:
snmptrapd.exe -register -Lf 7 d:/LogFiles/snmptrap/snmptrapd.log 10.155.3.30

I am trying to test to log some trap by using this example:
snmptrap -v 3 -c public -n "" -l noAuthNoPriv -u TestSNMP 10.155.3.30
uptime .1.3.6.1.4.1.23629.3.1.1.11


I have only configured the snmptrapd.conf file and place there options like
this:
createUser TestSNMP
authUser log TestSNMP noauth
format2 "%02.2h:%02.2j:%02.%k TRAP%W.%P from %A\n"
outputOption -Os

And my snmp.conf like this:
defSecuritylevel noAuthNoPriv
defSecurityName TestSNMP
mibs +SAFENET-LunaEFT-MIB
mibdirs C:/usr/share/snmp/mibs
defVersion 3
showMibErrors yes
logTimestamp no
dumpPacket true

The only way I can see something being logged in my log file is when I set
this:
dumpPacket true

And I think this output in my logs with the dump enabled is correct:
Received 131 byte packet from UDP: [10.155.3.30]:49272->[0.0.0.0]:0
0000: 30 81 80 02  01 03 30 0F  02 02 39 5F  02 03 00 FF    0.....0...9_...
0016: E3 04 01 00  02 01 03 04  29 30 27 04  11 80 00 1F    γ.......)0'.....
0032: 88 80 94 35  00 00 C1 11  82 58 00 00  00 00 02 01    ..”5..Α.‚X......
0048: 01 02 01 00  04 08 54 65  73 74 53 4E  4D 50 04 00    ......TestSNMP..
0064: 04 00 30 3F  04 11 80 00  1F 88 80 94  35 00 00 C1    ..0?.......”5..Α
0080: 11 82 58 00  00 00 00 04  00 A7 28 02  02 35 95 02    .‚X......§(..5•.
0096: 01 00 02 01  00 30 1C 30  1A 06 0A 2B  06 01 06 03    .....0.0...+....
0112: 01 01 04 01  00 06 0C 2B  06 01 04 01  81 B8 4D 03    .......+.....ΈM.
0128: 01 01 0B                                              ...

I am curious to know how can I log the trap information to have at the end
something like this or at least not Hex info like above:
#<SNMP::SNMPv1_Trap:0x5161ac1d @enterprise=[1.3.6.1.4.1.2854],
@timestamp=#<SNMP::TimeTicks:0x5fa65841 @value=59948346>, @varbind_list=[],
@specific_trap=1, @source_ip="10.155.3.30",
@agent_addr=#<SNMP::IpAddress:0x5b99c76d @value="\n\x9B\x03\x1E">,
@generic_trap=6>


I have been not successful so far with the man files for snmptrapd.conf,
snmpd.conf, snmpcmd... maybe I am totally wrong with my understanding of
how to make this package work?

I don't have any other configuration files, or any other services from the
package installed/running at the same time as snmptrapd daemon.

Thanks a lot and kind regards,
Ruth

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users