snmpget on a broadcast address
Guru Prasad <[email protected]>
| Newsgroups | gmane.network.net-snmp.user |
|---|---|
| Message-ID | <CALJkaf=HtJWOmCsEvJo5EQPyupnS-5Efi9rECAHe0W71RzBLSQ@mail.gmail.com> |
Hi All, Using netsnmp-5.7.3 in a debian machine. I am trying to run snmpget on the network's broadcast address so as to get all the snmp agents in my network. But i could not get the response of the snmp agents at once. It gives the information of one snmp agent at a time snmpget -v2c -c public <192.168.1.25> 1.3.6.1.2.1.1.1.0 Actually i have two snmp agents in my network. But getting only one agent's info at a time SNMPv2-MIB::sysDescr.0 = STRING: Linux Debian-64 bit Running the above snmpget command after few seconds gives SNMPv2-MIB::sysDescr.0 = STRING: Linux Ubuntu-32 bit But what i expect is snmpget -v2c -c public <192.168.1.25> 1.3.6.1.2.1.1.1.0 should give the following output SNMPv2-MIB::sysDescr.0 = STRING: Linux Debian-64 bit (192.168.1.10) SNMPv2-MIB::sysDescr.0 = STRING: Linux Ubuntu-32 bit (192.168.1.15) Why snmpget is not giving the output of all snmp agents at once? Thanks Guruprasad ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Net-snmp-users mailing list [email protected] Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users