snmpwalk problem

Hi Team,

I am having a problem when retrieving the value of dynamic counters having
an index greater than 114 as shown below on my Linux box

snmpwalk -v2c -c public localhost
jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.115
jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.115: Unknown
Object Identifier (Index out of range: 115 (name))

While if i perform the same command on an index lower than 115 the value is
properly returned

snmpwalk -v2c -c public localhost
jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo.111
JINNY-JAR-MIB::smppsir-dlvmo.111 = Counter32: 0

The related part of the MIB is the following:

-- JAR- SMPP SI RX dynamic counters
smppsirTable    OBJECT-TYPE
SYNTAX      SEQUENCE OF SMPPSIREntry
ACCESS      not-accessible
STATUS      mandatory
DESCRIPTION ""
::= { jar 60 }

smppsirEntry    OBJECT-TYPE
SYNTAX      SMPPSIREntry
ACCESS      not-accessible
STATUS      mandatory
DESCRIPTION ""
INDEX       { name }
::= { smppsirTable 1 }

SMPPSIREntry    ::= SEQUENCE {
        name        OCTET STRING,
        smppsir-bndrx   Counter,
        smppsir-bndrx-a Counter,
        smppsir-dlvmo   Counter,
        smppsir-dlvmo-a Counter,
        smppsir-dr  Counter,
        smppsir-dr-a    Counter,
        smppsir-alive   Gauge,
        smppsir-slink   Counter,
        smppsir-slink-a Counter,
        smppsir-rlink   Counter,
        smppsir-rlink-a Counter,
        smppsir-dmo-ack   Counter,
        smppsir-dr-ack    Counter,
        smppsir-dr-dlv       Counter,
        smppsir-dr-udlv   Counter }

name        OBJECT-TYPE
SYNTAX          OCTET STRING (SIZE(0..255))
ACCESS          not-accessible
STATUS          mandatory
DESCRIPTION "The dynamic name of the counter"
::= { smppsirEntry 2 }

smppsir-bndrx   OBJECT-TYPE
SYNTAX      Counter
ACCESS      read-only
STATUS      mandatory
DESCRIPTION "Total receiver binds"
::= { smppsirEntry 3 }

smppsir-bndrx-a OBJECT-TYPE
SYNTAX      Counter
ACCESS      read-only
STATUS      mandatory
DESCRIPTION "Total receiver binds (ack)"
::= { smppsirEntry 4 }

smppsir-dlvmo   OBJECT-TYPE
SYNTAX      Counter
ACCESS      read-only
STATUS      mandatory
DESCRIPTION "Total Received MO messages"
::= { smppsirEntry 5 }

smppsir-dlvmo-a OBJECT-TYPE
SYNTAX      Counter
ACCESS      read-only
STATUS      mandatory
DESCRIPTION "Total Received MO messages (ack)"
::= { smppsirEntry 6 }


If we run the snmpwalk to retrieve all the dlvmo counters values all the
counters are displayed even the ones having an index higher than 114

snmpwalk -v2c -c public localhost
jinny.generic.jar.smppsirTable.smppsirEntry.smppsir-dlvmo
JINNY-JAR-MIB::smppsir-dlvmo.1 = Counter32: 0
JINNY-JAR-MIB::smppsir-dlvmo.2 = Counter32: 0
JINNY-JAR-MIB::smppsir-dlvmo.3 = Counter32: 0
JINNY-JAR-MIB::smppsir-dlvmo.4 = Counter32: 0
JINNY-JAR-MIB::smppsir-dlvmo.5 = Counter32: 0

...
...

JINNY-JAR-MIB::smppsir-dlvmo.118 = Counter32: 0
JINNY-JAR-MIB::smppsir-dlvmo.119 = Counter32: 19136
JINNY-JAR-MIB::smppsir-dlvmo.120 = Counter32: 38025
JINNY-JAR-MIB::smppsir-dlvmo.121 = Counter32: 113871
JINNY-JAR-MIB::smppsir-dlvmo.122 = Counter32: 190952

...
...


Thus the problem is only when trying to retrieve dynamic counters with
index greater than 114
The server has SNMP version 5.3.2.2

snmpwalk -V
NET-SNMP version: 5.3.2.2

Can you advice concerning this problem

Thanks in advance.

_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users