Re: How to support SNMPv2 mib traps per VRF.

Spell check has done in line.
________________________________
From: chandrasekharreddy chinnapareddygari <[email protected]>
Sent: Wednesday, 20 October, 2021, 14:15
To: [email protected]; [email protected]
Subject: How to support SNMPv2 mib traps per VRF.

Hi ,


We are supporting Multiple snmp servers (snmp server for each VRF).I want to enable authenticationfailure traps for each VRF.

Net-snmp has inbuilt token authtrapenable .Authentication Failure traps are sending to the receivers ,If authtrapenable is set to 1 in /etc/snmp/snmpd.conf .

But, /etc/snmp/snmpd.conf file is common file for all  VRFs. My requirement is trapsinks ,  ,authentication failure traps status , cold start and  warm start traps should be per VRF.


I have tried with adding authtrapenable 1 token in snmp.conf file. Which is local for each VRF. But snmpwalk output of snmpEnableAuthenTraps Oid is returning as disable(2).





Please help me to resolve above  issues.













Thanks,
Chandra.

_______________________________________________
Net-snmp-coders mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders