RE: One NoCat for different subnets
"Jay Fajardo" <[email protected]>
| Newsgroups | gmane.network.nocat |
|---|---|
| Message-ID | <[email protected]> |
In you nocat.conf file. Uncomment the IgnoreMac directive. Jay _____ From: [email protected] [mailto:[email protected]] On Behalf Of Omar Garcia Sent: Thursday, September 16, 2004 7:23 PM To: [email protected] Subject: [NoCat] One NoCat for different subnets Hi people, I have a problem and i´d like your advise. My network are composed by three nets with different subnet address. One router is between them. <<----Internet----->>> | | NoCat machine | |192.168.0.x/24 | AP 1 --------------------------------- Router-----------------------------------AP2 192.168.1.x/24 | 192.168.3.x/24 | | | AP3 192.168.2.x/24 These APs are as bridge, so each AP serves dhcp with ip gateway to Router. The route doen´t made NAT, it only route. THE PROBLEM is that NoCat can´t authenticate because it doesn´t have the clients mac address, it only has the ip address ( the mac address is router address) [2004-09-16 11:22:35] Spawning child process 2490. [2004-09-16 11:22:35] Connection to 192.168.0.1 from 192.168.1.10 [2004-09-16 11:22:35] Can't capture peer 192.168.1.10 without MAC Is there a solution? Can I patch the sources to validate only by ip address? Thanks you at all and sorry for my english. _______________________________________________ NoCat mailing list [email protected] http://lists.nocat.net/mailman/listinfo/nocat