RE: Wireless clients not getting routed properly
"Scott C. Lemon" <[email protected]>
| Newsgroups | gmane.network.nocat |
|---|---|
| Organization | HumanXtensions L.L.C. |
| Message-ID | <001e01c4e127$0db7f3f0$3c0a640a@NewCell> |
Also make sure that the client got the DNS info from the DHCP server ... E.g. the client has to be configured to use the GW as it's DNS server ... Scott C. Lemon -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bernie O'Connor Sent: Monday, December 13, 2004 6:46 AM To: [email protected] Subject: RE: [NoCat] Wireless clients not getting routed properly If you can ping the the ipaddress, it is probably a client problem..make sure the client has all proxy information turned off... bernie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Chris Priest Sent: Monday, December 13, 2004 5:35 AM To: [email protected] Subject: [NoCat] Wireless clients not getting routed properly Hi All, I have just finished setting up NoCat on a Redhat 9 box, the box also serves as a DHCP server for the internal lan (wireless AP connected) The wireless client picks up an IPAddress from the Redhat box, I can ping both the internal and external interfaces of the NoCat box, but cannot get any further, any attempt to visit a webpage results in a Host not found error, I don't have any DNS resolution, the DHCP server is giving out the same IP as that contained within the NoCat.conf file. I'm sure it's a routing issue, I was under the impression that NoCat automatically handled the routing? Is this not the case? Can anyone provide me with anything that I might check? Best Regards Chris _______________________________________________ NoCat mailing list [email protected] http://lists.nocat.net/mailman/listinfo/nocat _______________________________________________ NoCat mailing list [email protected] http://lists.nocat.net/mailman/listinfo/nocat