Help w/ NoCat - config problems

I am trying to run NoCat from my laptop for a project for school.  I have been successful at installing NoCat nightly.  I setup the Gateway and the Authentication with no problems but I ‘m sure that their some things I have not address.   I have setup the gateway for an open portal but I would like to set to captive portal which I will address later.  The open portal works but it’s not what I need, but it seems to be the only thing working. Below I will show you my configuration, and let me know what I’m doing wrong.

 

Hardware:

Dell Laptop

AP = Linksys WRT54g

 2 – NIC

19 gb HD

 

Software:

Red Hat Linux 9

Apache 2

DNS

NoCatAuth nightly 0.82

 

Gateway – nocat.conf

Gateway Mode: open

 

InternalDevice – eth0

Ip: 192.168.1.65

Subnet: 255.255.255.0

Default Gateway: 192.168.1.1

 

externalDevice – eth1

Automatic DHCP – my service provider is SBC don’t have a static IP

LocalNetwork: 192.168.1.65/255.255.255.0

DNSaddr: commented out

AuthserviceAddr: 127.0.0.1

 

Authentication – nocat.conf

DataSource: MySql

Locagateway: 192.168.1.65

HTML location: /var/www/htdocs


		
---------------------------------
Yahoo! for Good
 Click here to donate to the Hurricane Katrina relief effort.