Re: [c-nsp] Redistribute interface address as a /32 or /128 into BGP
Maximilian Wilhelm <[email protected]>
| Newsgroups | gmane.network.nsp.cisco |
|---|---|
| Message-ID | <[email protected]> |
Anno domini 2021 Johannes Erwerle scripsit: Hi, [...] > 2. announce the interface addresses (10.0.0.2 and 10.0.0.3 in this case) > as a /32 into the backbone so that they are more specifics and take the > right way through the backbone and not through the 10.0.0.0/24 network. > > My problem is that I can not convince my router to announce the > interface addresses. I tried to simply add a > > network 10.0.0.2 > > to the BGP config, but apparently the local routes that the router > creates for it's interfaces are not announced. [...] I'm wondering if the default classfulness is biting you here. Have you tried network 10.0.0.2 mask 255.255.255.255 by any chance? Best Max _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/