> We recently upgraded our network from ASR1004s to ASR1009xs.
>
> We are encountering thruput limits on 10G interfaces and were
> wondering whether others have seen that as well.
>
> Hard limits seems to be 2.4G or 4G and we are not able to reach line
> rate of 10G. Have tried iperf which hits the wall as well.
We had a client recently who couldn't get more than around 2.5 Gbps
through their ASR1k. Turned out they were missing a required
"performance upgrade" license. Could that be your problem?
Steinar Haug, Nethelp consulting, [email protected]
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.