Re: [c-nsp] RSP720 fabric channel speed

Łukasz Bromirski <[email protected]>
Newsgroups gmane.network.nsp.cisco
Message-ID <[email protected]>
That's normal, older Sup switching matrixes were not running
in active/active mode.

So, the standby Sup is doing exactly that - standing by to take
over.

— 
Łukasz Bromirski

> On 8 May 2021, at 08:37, Eugene Grosbein <[email protected]> wrote:
> 
> Hi!
> 
> This is for Cisco 7606 with two RSP720-3CXL-GE working as AS border router with BGP full views:
> 
> #show fabric status
> slot  channel speed module   fabric      hotsync  Standby  Standby
>                     status   status      support  module   fabric
>    2        0   20G     OK       OK         N/A
>    3        0   20G     OK       OK         N/A
>    3        1   20G     OK       OK         N/A
>    4        0   20G     OK       OK         N/A
>    4        1   20G     OK       OK         N/A
>    5        0    8G     OK       OK         N/A
>    6        0   20G     OK       OK         N/A
> 
> I wonder why module 5 can possibly have 8G speed instead of 20G?
> System image file is "sup-bootdisk:c7600rsp72043-adventerprisek9-mz.153-3.S2.bin"
> 
> #show module
> Mod Ports Card Type                              Model              Serial No.
> --- ----- -------------------------------------- ------------------ -----------
>  2   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP       SAD095100KW
>  3    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      SAL11413Y50
>  4    4  CEF720 4 port 10-Gigabit Ethernet      WS-X6704-10GE      SAL1206FSRB
>  5    2  Route Switch Processor 720 (Hot)       RSP720-3CXL-GE     SAL1631JGQP
>  6    2  Route Switch Processor 720 (Active)    RSP720-3CXL-GE     JAE11484O8V
> 
> Mod MAC addresses                       Hw   Fw            Sw           Status
> --- ---------------------------------- ----- ------------- ------------ -------
>  2  0015.f91d.3aa4 to 0015.f91d.3abb  2.3   12.2(14r)S    15.3(3)S     Ok
>  3  001b.d4f7.22fc to 001b.d4f7.22ff  2.6   12.2(14r)S    15.3(3)S     Ok
>  4  001e.4a79.3ee8 to 001e.4a79.3eeb  2.6   12.2(14r)S    15.3(3)S     Ok
>  5  2894.0fd1.3950 to 2894.0fd1.3953  5.13  12.2(33r)SR   15.3(3)S     Ok
>  6  001b.d401.6654 to 001b.d401.6657  5.2   12.2(33r)SRB  15.3(3)S     Ok
> 
> Mod  Sub-Module                  Model              Serial       Hw     Status
> ---- --------------------------- ------------------ ----------- ------- -------
>  2  Centralized Forwarding Card WS-F6700-CFC       SAL10019C56  2.0    Ok
>  3  Centralized Forwarding Card WS-F6700-CFC       SAL11413Y1P  4.0    Ok
>  4  Centralized Forwarding Card WS-F6700-CFC       SAL1207GEZT  4.0    Ok
>  5  Policy Feature Card 3       7600-PFC3CXL       SAL1631JD1G  1.1    Ok
>  5  C7600 MSFC4 Daughterboard   7600-MSFC4         SAL1631J9ST  5.0    Ok
>  6  Policy Feature Card 3       7600-PFC3CXL       JAE114749TM  1.0    Ok
>  6  C7600 MSFC4 Daughterboard   7600-MSFC4         JAE11474ID5  1.1    Ok
> 
> Mod  Online Diag Status
> ---- -------------------
>  2  Pass
>  3  Pass
>  4  Pass
>  5  Pass
>  6  Pass
> 
> _______________________________________________
> cisco-nsp mailing list  [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.