Re: [c-nsp] Cisco ASR 901 as a DHCP server

I think the NAT might be the problem. Also you need to add the 192.168.4.1 gateway.

-- 
Jerry Bacon
StarTouch - Senior Network Engineer
Sent from my iPhone

> On May 21, 2021, at 11:30 AM, Scott Miller <[email protected]> wrote:
> 
> Wondering if anyone has configured a 901 as a DHCP server.  It's being used
> in a multi-tenant location, other customers are static public /30 and work
> fine, but we have a customer who wants us to do DHCP for them. So instead
> of adding another box, I was trying to get the 901 to be the DHCP server.
> For some reason, it's not working.  I have configured other routers no
> problem as a DHCP server, this one the client gets an IP, can ping the
> gateway, can ping the uplink IP, can ping the core, but can't leave our
> network.  Kinda feels like a MTU issue, but all set to 9000.  Here's my
> config:
> Anyone ever try it, and have any suggestions?
> 
> ASR901 - A901-12C-F-D
> AdvancedMetroIPAccess
> Version 15.6(2)SP3
> 
> !
> ip dhcp excluded-address 192.168.3.1 192.168.3.50
> ip dhcp excluded-address 192.168.4.0 192.168.4.50
> !
> ip dhcp pool DATA
> network 192.168.3.0 255.255.255.0
> default-router 192.168.3.1
> dns-server xx.xx.xx.xx
> !
> ip dhcp pool VOICE
> network 192.168.4.0 255.255.255.0
> dns-server xx.xx.xx.xx
> default-router 192.168.4.1
> !
> interface GigabitEthernet0/0
> description UPLINK TO CORE
> mtu 9000
> no ip address
> ip nat outside
> load-interval 30
> negotiation auto
> service instance 50 ethernet
>  description PTP to CORE OSPF Area 0
>  encapsulation untagged
>  bridge-domain 50
> !
> interface Vlan50
> description OSPF TO CORE
> mtu 9000
> ip address xx.xx.206.30 255.255.255.252
> no ip redirects
> no ip proxy-arp
> ip nat outside
> ip pim sparse-mode
> ip ospf network point-to-point
> ip ospf mtu-ignore
> load-interval 30
> carrier-delay msec 0
> mpls ip
> mpls traffic-eng tunnels
> !
> interface GigabitEthernet0/1
> description Uplink to Customer XXXXXX - DHCP Inside
> mtu 9000
> no ip address
> ip nat inside
> load-interval 30
> negotiation auto
> service instance 100 ethernet
>  description XXXXXXX Data Network
>  encapsulation untagged
>  bridge-domain 100
> !
> !
> interface Vlan100
> description XXXXXX Data Network
> mtu 9000
> ip address 192.168.3.1 255.255.255.0
> no ip redirects
> no ip proxy-arp
> ip nat inside
> !
> ip nat inside source list 150 interface Vlan50 overload
> !
> access-list 150 remark Network Address Translation
> access-list 150 permit ip 192.168.3.0 0.0.0.255 any
> access-list 150 permit ip 192.168.4.0 0.0.0.255 any
> _______________________________________________
> cisco-nsp mailing list  [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/