> Can you review if you may be software switching, instead of QFP.
> show platform hardware qfp active infrastructure punt statistics
interface name te0/1/4
> show platform hardware qfp active infrastructure punt statistics
interface name te0/1/7
> show platform hardware qfp active infrastructure punt statistics type
> per-cause
After a month of nearly daily debug with Cisco TAC, including numerous
iperf and tcpdump sessions including escalation to the CATS (Core
Architecture Team), and coming to a brick wall, it was decided to swap
out the MIP100 and EPA10X10 cards. After insertion of alternate cards,
iperf jumped from 2.4G to 10G. The faulty cards are now on their back
to Cisco for diagnosis.
Thanks to all for their suggestions.
Regards,
Hank
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.