Re: [c-nsp] DMVPN limited at 40Mbps ?
Gerald Krause <[email protected]>
| Newsgroups | gmane.network.nsp.cisco |
|---|---|
| Message-ID | <[email protected]> |
What License have you active on the C1111? From what I recall is that the new ISR1100s have a limit of 50mbps IPSec Traffic with the standard "SEC" license. You need the extra "IPSec Performance" license to upgrade the IPSec throughput of those boxes. Gerald Am 28.12.21 um 14:39 schrieb Julien CANAT via cisco-nsp: > > Hello, > > We are using DMVPN and changed our hub from an old 1921 to a more recent (and more powerful) ASR 1002F, but we still are limited to a throughput of approximately 40Mbps using a C1111 as a spoke. > > Does anybody have an idea as to this limitation? > > Nothing indicates that the CPU of either the spoke or the hub are throttling. > > Regards, > > > -- > Julien CANAT > > > _______________________________________________ > cisco-nsp mailing [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive athttp://puck.nether.net/pipermail/cisco-nsp/ > > Anhänge: > > DMVPN limited at 40Mbps ?.eml 4.7 KB > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/