Re: [c-nsp] LSR platforms
Mark Tinka <[email protected]>
| Newsgroups | gmane.network.nsp.cisco |
|---|---|
| Message-ID | <[email protected]> |
On 12/10/20 20:02, James Mitchell wrote: > What hardware platforms are operators running as P routers for smaller MPLS > networks? I’m not interested in large CRS type platforms, but simply an LSR > thats main function is MPLS switching at 10/40/100G speeds. Preferably > Cisco. Anyone have a recommendation based on experience? Old thread, but somehow, missed it. We dumped our CRS-X's (8-slot) for the Juniper PTX1000 (2U box). We realized that we didn't really need all of those fan trays, power supplies, control planes, fabrics, line cards, forwarding cards, and half a rack, just to push a serious amount of traffic. It helps that one doesn't also need a chassis, nowadays, to carry a good number of 100Gbps ports. Sure, Cisco probably has something of similar size and stature as the PTX1000, but given their new path, we couldn't be asked. That said, as others also did, there are plenty of boxes carrying Broadcom's J2 that will do the job, especially if you relegate it to just a P function, and don't try to get funky with edge features. Mark. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/