[c-nsp] MTU and PMTUD

Marcin Kurek via cisco-nsp <[email protected]>
Newsgroups gmane.network.nsp.cisco
Message-ID <[email protected]> 
Hi all,

Assuming typical MPLS network running L2VPNs and L3VPNs, how do you 
configure MTU values for core interfaces? Do you set interface (L2) MTU, 
MPLS MTU and IP MTU separately?

Do you enable PMTUD for TCP based control plane protocols like BGP or LDP?


Thanks!

_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.