Re: [c-nsp] Large prefix lists/sets on IOS-XR

Hi,

Not much different than Junos.  Everything in the XR config can be configured using Netconf using either native models or OpenConfig.   You can check out https://github.com/YangModels/yang/tree/main/vendor/cisco/xr for supported models by version.   Any other questions just let me know.

Thanks,
Phil

From: cisco-nsp <[email protected]> on behalf of Sander Steffann via cisco-nsp <[email protected]>
Date: Thursday, December 8, 2022 at 7:02 PM
To: Aaron <[email protected]>
Cc: [email protected] <[email protected]>
Subject: Re: [c-nsp] Large prefix lists/sets on IOS-XR
Hi,

> netconf?

What are the magic incantations for netconf for XR? I have lots of experience with junos, but XR is still a mystery to me :)

Cheers,
Sander
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/