Re: [c-nsp] Netflow vs SNMP
Hank Nussbacher via cisco-nsp <[email protected]> Mon, 2 Oct 2023 13:10:36 +0300
| Newsgroups | gmane.network.nsp.cisco |
|---|---|
| Message-ID | <[email protected]> |
On 02/10/2023 10:10, Dobbins, Roland wrote: > Ensure that the active flow timer is set to 60s, that the inactive flow > timer is set to 5s, and that the NetFlow capture/analysis system is > configured with those values. > > For SNMP, ensure that the counter tabulation values are set to 60s/1m, > and that the SNMP polling/analysis system is configured with those values. We have set: cache timeout inactive 15 Kentik recommends 15s: https://github.com/kentik/config-snippets/blob/master/Cisco/IOS-XR/netflow-9.conf but I will try 5s based on your feedback. Regards, Hank _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/