[c-nsp] Pnet XRV 6.6.2
Mohammad Khalil via cisco-nsp <[email protected]> Wed, 27 Dec 2023 12:42:46 +0000
| Newsgroups | gmane.network.nsp.cisco |
|---|---|
| Message-ID | <VI1P189MB0269825803EBECA5116101C1FA9FA@VI1P189MB0269.EURP189.PROD.OUTLOOK.COM> |
Greetings I have uploaded image xrv 6.2.2 on pnet for a lab environment and the image booted successfuly. However , I am not able to ping any connected neighbor on any interface though all interfaces are up/up. Interface IP-Address Status Protocol Vrf-Name Loopback0 10.1.100.3 Up Up default MgmtEth0/0/CPU0/0 unassigned Shutdown Down default GigabitEthernet0/0/0/0 10.1.13.3 Up Up default GigabitEthernet0/0/0/1 10.1.35.3 Up Up default GigabitEthernet0/0/0/2 10.1.23.3 Up Up default GigabitEthernet0/0/0/3 unassigned Shutdown Down default GigabitEthernet0/0/0/4 unassigned Shutdown Down default GigabitEthernet0/0/0/5 unassigned Shutdown Down default Is there anything I should do to resolve this? Appreciated. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/