Re: [c-nsp] Local switching on EVPN port

Yes, I am trying to provision some new EVPN services while keeping the 
existing bridge-domains for local switching between vlans in place.

On 02/02/2024 13:11, Catalin Dominte wrote:
> Are you trying to migrate to EVPN? What are you trying to achieve? :)
> 
> Catalin
> ------------------------------------------------------------------------
> *From:* cisco-nsp <[email protected]> on behalf of Mihai 
> via cisco-nsp <[email protected]>
> *Sent:* Friday, February 2, 2024 1:05:12 PM
> *To:* [email protected] <[email protected]>
> *Subject:* [c-nsp] Local switching on EVPN port
> Hi,
> 
> On Cisco NCS I can configure local switching between two
> subinterfaces/vlans by adding them to a bridge domain as below:
> 
> l2vpn bridge group X bridge-domain X interface Bundle-Ether1.10
> l2vpn bridge group X bridge-domain X interface Bundle-Ether1.20
> 
> Once I enable EVPN on the physical interface/bundle the local switching
> no longer works.
> I kinda understand why it wouldn't work with EVPN but is there some knob
> that I can enable in order to preserve the functionality?
> 
> Thanks!
> _______________________________________________
> cisco-nsp mailing list  [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp 
> <https://puck.nether.net/mailman/listinfo/cisco-nsp>
> archive at http://puck.nether.net/pipermail/cisco-nsp/ 
> <http://puck.nether.net/pipermail/cisco-nsp/>
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/