Re: [c-nsp] [j-nsp] Stange issue on 100 Gbs interconnection Juniper - Cisco
Saku Ytti via cisco-nsp <[email protected]> Sun, 11 Feb 2024 14:03:10 +0200
| Newsgroups | gmane.network.nsp.cisco,gmane.network.nsp.juniper |
|---|---|
| Message-ID | <CAAeewD_wuMqaLvLHu3sBkbPDmr9b1datVBNzW=ENSjXf008Fpg@mail.gmail.com> |
On Sun, 11 Feb 2024 at 13:51, james list via juniper-nsp <[email protected]> wrote: > One think I've omit to say is that BGP is over a LACP with currently just > one interface 100 Gbs. > > I see that the issue is triggered on Cisco when eth interface seems to go > in Initializing state: Ok, so we can forget BGP entirely. And focus on why the LACP is going down. Is the LACP single port, eth1/44? When the LACP fails, does Juniper end emit any syslog? Does Juniper see the interface facing eth1/44 flapping? -- ++ytti _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/