Re: [f-nsp] Brocade IPSEC modules
Eldon Koyle <[email protected]>
| Newsgroups | gmane.network.nsp.foundry |
|---|---|
| Message-ID | <CAKJRP3RAp5m_3ZZdYqaNd2fDPs8EqYcs5Rynk_w=99=qSw3OQA@mail.gmail.com> |
Sorry, I'm getting a bit off the topic of this thread. Apparently I am wrong about the end of support version for ICX64xx... It is 08030 that is the last available version. The ICX6430-C12 is only like 3 years old, though... seems a bit early to drop the line from newer code versions. There were changes between 08010 and 08030 that are incompatible with our current implementation. They made some heavy changes to mac-based authentication (mostly for the best), as well as some considerable changes to the config syntax for mac-auth. We had the auth-fail VLAN set to the default VLAN; they no longer allow this (for "security" reasons, they said; it fails with an error message). Their final response to us is "that was never supported". Seems to be the default response for anything ICX related. -- Eldon On Tue, Aug 16, 2016 at 11:33 AM, Robert Hass <[email protected]> wrote: > Well, we're running 8.0.30 builds on ICX64xx lines for few months without > any special problems. Our campus is around 200+ switches. > Problem is split between 8.0.30 and 8.0.40+ for ICX7xxx, as new features we > can have just on few switches in new network :( > > Rob > > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp