Re: [f-nsp] Multicast is being switched by LP CPU on MLXe?

Eldon Koyle <[email protected]>
Newsgroups gmane.network.nsp.foundry
Message-ID <CAKJRP3RCJaVEFrHpRWuW6ZS3bhsiOnHyZTbvzVL8CW3ZBT2nzg@mail.gmail.com>
I guess I should have asked whether you are running pim first.  Is there a
ve on that VLAN with ip pim configured?

-- 
Eldon

On Dec 18, 2016 10:03 AM, "Eldon Koyle" <[email protected]>
wrote:

> What does your pim configuration look like?  Especially your rp  config.
>
> Making sure there is no rp-candidate for traffic you want to keep on a
> single l2 domain can help a lot (in fact, we only add rp entries for
> specific apps).  This is especially true for groups used by SSDP or mDNS.
> It's been a while, but I remember having similar issues.  I'll have to go
> dig through my configs and see if it reminds me of anything else.
>
> --
> Eldon Koyle
>
> On Dec 13, 2016 08:29, "Alexander Shikoff" <[email protected]> wrote:
>
>> Hi!
>>
>>
>> Well, I'd like to bring this thread up again hoping to catch
>> someone who has also hit this issue.
>>
>> Today I upgraded software to 05.9.00be, and situation is still
>> the same: with enabled Multicast Traffic Reduction,
>> multicast traffic is being switched by LP CPU.
>>
>> Current test VLAN configuration is:
>> !
>> vlan 450 name ITCons2DS_test
>>  tagged ethe 7/1 to 7/2 ethe 9/5 ethe 11/2 ethe 12/8 ethe 13/8
>>  multicast passive
>>  multicast pimsm-snooping
>> !
>>
>> [email protected]#show vlan 450
>>
>> PORT-VLAN 450, Name ITCons2DS_test, Priority Level 0, Priority Force 0,
>> Creation Type STATIC
>> Topo HW idx    : 65535    Topo SW idx: 257    Topo next vlan: 0
>> L2 protocols   : NONE
>> Statically tagged Ports    : ethe 7/1 to 7/2 ethe 9/5 ethe 11/2 ethe 12/8
>> ethe 13/8
>> Associated Virtual Interface Id: NONE
>> ----------------------------------------------------------
>> Port  Type      Tag-Mode  Protocol  State
>> 7/1   TRUNK     TAGGED    NONE      FORWARDING
>> 7/2   TRUNK     TAGGED    NONE      FORWARDING
>> 9/5   TRUNK     TAGGED    NONE      FORWARDING
>> 11/2  TRUNK     TAGGED    NONE      FORWARDING
>> 12/8  TRUNK     TAGGED    NONE      FORWARDING
>> 13/8  TRUNK     TAGGED    NONE      FORWARDING
>> Arp Inspection: 0
>> DHCP Snooping: 0
>> IPv4 Multicast Snooping: Enabled - Passive
>> IPv6 Multicast Snooping: Disabled
>>
>> No Virtual Interfaces configured for this vlan
>>
>>
>> IGMP snooping works, I'm able to see In/Out interfaces and current
>> active querier:
>>
>> [email protected]#show ip multicast vlan 450
>> ----------+-----+---------+---------------+-----+-----+------
>> VLAN       State Mode      Active          Time (*, G)(S, G)
>>                            Querier         Query Count Count
>> ----------+-----+---------+---------------+-----+-----+------
>> 450        Ena   Passive   192.168.210.1   119   1     1
>> ----------+-----+---------+---------------+-----+-----+------
>>
>> Router ports: 12/8 (11s)
>>
>> Flags-  R: Router Port,  V2|V3: IGMP Receiver,  P_G|P_SG: PIM Join
>>
>>   1    (*, 239.32.4.130) 00:34:48       NumOIF: 1       profile: none
>>           Outgoing Interfaces:
>>                e9/5 vlan 450 ( V2) 00:34:48/40s
>>
>>   1    (91.238.195.1, 239.32.4.130) in e11/2 vlan 450 00:34:48
>> NumOIF: 1  profile: none
>>           Outgoing Interfaces:
>>                TR(e9/5,e7/1) vlan 450 ( V2) 00:34:48/0s
>>           FID: 0xa0a9     MVID: None
>>
>>
>> Right after multicast stream start flooding from Eth11/2 out of
>> TR(e9/5,e7/1),
>> the CPU load on LP 11 increases:
>>
>> [email protected]#show cpu-utilization lp 11
>>
>> 17:25:10 GMT+02 Tue Dec 13 2016
>>
>> SLOT  #:               LP CPU UTILIZATION in  %:
>>              in 1 second:  in 5 seconds:  in 60 seconds: in 300 seconds:
>>     11:        6             6              6               6
>>
>>
>>
>> And I see these packets processed by LP CPU:
>>
>> LP-11#debug packet capture include vlan-id 450
>> [...]
>> 91.238.195.1 -> 239.32.4.130 UDP [2000 -> 2000]
>> **********************************************************************
>> [ppcr_tx_packet] ACTION: Forward packet using fid 0xa0a9
>> [xpp10ge_cpu_forward_debug]: Forward LP packet
>> Time stamp : 00 day(s) 11h 32m 49s:,
>> TM Header: [ 1022 00a9 a0a9 ]
>> Type: Multicast(0x00000000) Size: 34 Mcast ID: 0x9a0 Src Port: 2
>> Drp Pri: 2 Snp: 2 Exclude Src: 0 Cls: 0x00000001
>> **********************************************************************
>> 00: a0a9 0403 5e50 41c2-7840 0abc 4400 0000  FID     = 0xa0a9
>> 10: 0100 5e20 0482 f4cc-55e5 4600 0800 4588  Offset  = 0x10
>> 20: 0540 08df 0000 3d11-5cb4 5bee c301 ef20  VLAN    = 450(0x01c2)
>> 30: 0482 07d0 07d0 052c-0000 4701 e11a 8534  CAM     = 0x00055e
>> 40: 5a95 fb85 94ee 0b69-9938 967a c827 f571  SFLOW   = 0
>> 50: 73cc 8e72 98cc 82e0-436e 30f1 4414 f400  DBL TAG = 0
>> 60: 11fd 7b2b c8be d9ca-d0fa 44d0 45b5 53e5
>> 70: a386 ac24 cc0b 9698-c0a2 ff65 9f32 6b14
>> Pri CPU MON SRC   PType US BRD DAV SAV DPV SV ER TXA SAS Tag MVID
>> 4   0   0   11/2  3     0  1   0   1   1   1  1  0   0   1   0
>>
>> 91.238.195.1 -> 239.32.4.130 UDP [2000 -> 2000]
>> **********************************************************************
>> [ppcr_rx_packet]: Packet received
>> Time stamp : 00 day(s) 11h 32m 49s:,
>> TM Header: [ 0564 8a23 0040 ]
>> Type: Fabric Unicast(0x00000000) Size: 1380 Class: 4 Src sys port: 2595
>> Dest Port: 0  Drop Prec: 1 Ing Q Sig: 0 Out mirr dis: 0x0 Excl src: 0 Sys
>> mc: 0
>> **********************************************************************
>> Packet size: 1374, XPP reason code: 0x00045286
>> 00: 05f0 0403 5c50 41c2-7841 fffe 4400 0000  FID     = 0x05f0
>> 10: 0100 5e20 0482 f4cc-55e5 4600 0800 4588  Offset  = 0x10
>> 20: 0540 08e0 0000 3d11-5cb3 5bee c301 ef20  VLAN    = 450(0x01c2)
>> 30: 0482 07d0 07d0 052c-0000 4701 e11f c052  CAM     = 0x00ffff(R)
>> 40: e9df e2fb 1f9d 0c1d-354a 7df5 f0df edab  SFLOW   = 0
>> 50: 1145 566c 4c59 2557-f7cf c708 a75e 5a29  DBL TAG = 0
>> 60: 1704 9f8b 151c b66b-957a 51eb ac99 772d
>> 70: 07e7 23d7 f84a 50ac-5864 452d 7f70 0495
>> Pri CPU MON SRC   PType US BRD D
>> 4   0   0   11/2  3     0  1   0   1   1   1  0  0   0   1   0
>>
>>
>> I have no ideas why it happens. "Multicast Guide" clearly tells
>> that these packets should be processed in hardware.
>> Please advice!
>>
>> Thanks!
>>
>> --
>> MINO-RIPE
>> _______________________________________________
>> foundry-nsp mailing list
>> [email protected]
>> http://puck.nether.net/mailman/listinfo/foundry-nsp
>>
>

_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.