Re: [f-nsp] ICX and EPS 4000
Alain Hebert <[email protected]>
| Newsgroups | gmane.network.nsp.foundry |
|---|---|
| Organization | PubNIX, Inc. |
| Message-ID | <[email protected]> |
Thank you Wilbur,
I went thru the lot and found one with his firmware in place.
It does behave like that. and work like a charm with the ICX 7250 have.
Now it is just a question to open an account and spend the $ for
the firmware from TAC =D
-----
Alain Hebert [email protected]
PubNIX Inc.
50 boul. St-Charles
P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
Tel: 514-990-5911 http://www.pubnix.net Fax: 514-990-9443
On 01/18/17 19:57, Wilbur Smith wrote:
>
> Although the EPS has firmware, there’s really not much to this box and
> I’ve never heard of anyone needing to update firmware on it.
> Installation is pretty basic: just rack it, connect the cales to the
> switches correctly, then plug in the power to it:
> http://www.brocade.com/content/html/en/hardware-installation-guide/fastiron-08040-icx7250-installguide/GUID-87B53BD2-955C-4984-B5E6-B4B91F21C176.html
>
> The switch ICX switches actually manage the EPS through the DC
> connection cable
>
> You’ll know the EPS is operating correctly based on the LEDs:
> http://www.brocade.com/content/html/en/hardware-installation-guide/fastiron-08040-icx7250-installguide/GUID-2A1873CD-7603-4868-922B-D7D5140D7DD4.html
>
> Wilbur Smith
>
> Systems Engineer
>
> [email protected] <mailto:[email protected]>
>
> *From:*foundry-nsp [mailto:[email protected]] *On
> Behalf Of *Alain Hebert
> *Sent:* Monday, January 16, 2017 6:00 AM
> *To:* [email protected]
> *Subject:* [f-nsp] ICX and EPS 4000
>
> Anyone has experience with EPS 4000, a DC power solution for the ICX.
>
> A stack of 12 ICX 7250 and 2 EPS 4000, used, appear in our loading
> bay, now we're looking to make something out of it =D.
>
> We cannot find any sort of documentation in Brocade, beside basic
> installation instruction in ICX documentation, nor any sign of
> firmware release.
>
> Everything seems to be working but for the EPS not providing DC
> current and looking to download EPS4000.hex from a TFTP server
> provided by DHCP.
>
> Also the EPS4k do not seems to have any firmware loaded beside the
> basic rommon.
>
> --
> -----
> Alain [email protected] <mailto:[email protected]>
> PubNIX Inc.
> 50 boul. St-Charles
> P.O. Box 26770 Beaconsfield, Quebec H9W 6G7
> Tel: 514-990-5911http://www.pubnix.net
> <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.pubnix.net&d=DwMDaQ&c=IL_XqQWOjubgfqINi2jTzg&r=l86Fj-WC0GHHSCjQjuUvTzxOj0iW25AHL3VIC5Dog8o&m=dptsn2E6EAxPaCWqkmdh7w-g0Aged0KFJ0TWX3lD_VQ&s=vxTL1vHLTH0-4k5N2SQjE1O_xZ_3lApggW1pBez7FyY&e=> Fax: 514-990-9443
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp