Re: [f-nsp] CER-RT X4 MP CPU

Jorg,

Cheers, looks exactly the same as the old model (2024C-RT):

800 MHz Power PC processor 8544 (version 8021/0023) 400 MHz bus
512 KB Boot Flash (MX29LV040C), 64 MB Code Flash (MT28F256J3)

I was hoping for a boost to improve the BGP convergence.

Pat

Thu, Apr 20, 2017 at 08:40:07AM +0800, Jörg Kost wrote:

> Do you mean 2024F-4X-RT or 2024C-4X-RT?
> 
> 2024C-4X-RT:
> 800 MHz Power PC processor 8544 (version 8021/0023) 400 MHz bus
> 512 KB Boot Flash (MX29LV040C), 64 MB Code Flash (MT28F256J3)
> 2048 MB DRAM
> 
> 
> On 20 Apr 2017, at 8:20, Patrick Cole wrote:
> 
> > Could anyone kindly elaborate on if the MP CPU in the new CERs has been
> > upgraded at all from the older units?
> >
> > Perhaps post a "show version" ?
> >
> > The old ones have an 800MHz PPC, just wondering if this has been upgraded.
> >
> > Thanks.
> >
> > Patrick Cole <[email protected]>
> > Senior Network Specialist
> > World Without Wires
> > PO Box 869. Palm Beach, QLD, 4221
> > Ph:  0410 626 630
> > _______________________________________________
> > foundry-nsp mailing list
> > [email protected]
> > http://puck.nether.net/mailman/listinfo/foundry-nsp
> 

-- 
Patrick Cole <[email protected]>
Senior Network Specialist
World Without Wires
PO Box 869. Palm Beach, QLD, 4221
Ph:  0410 626 630
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp