Re: [f-nsp] [MLX] - Disable snmp-auth-failure logging

It is my belief Mathieu got his answer :

https://community.brocade.com/t5/Ethernet-Switches-Routers/MLX-Disable-snmp-auth-failure-logging/td-p/92444

HTH.



2017-05-17 10:06 GMT+02:00 Franz Georg Koehler <[email protected]>:

> On Wed, May 17, 2017 at 08:53:37AM +0200, Mathieu Adamczewski wrote:
> > Hello everyone,
> >
> > I would like to know if it is possible to make my MLX forget messages in
> > logs when an unauthorized IP tries to connect to my equipment.
> >
> > Because I have in my logs I constantly this kind of message:
> >
> > May 15 10:05:51: I: Security: SNMP access from src IP 185.35.62.142
> > rejected, 1 attempt (s)
>
> We see those messages in the logs for years now.
> While I initially thought this is related to a missing snmp filter, the
> filter
> is set correctly. It looks like the ACL in the snmp community statement
> does
> not prevent the packets from hitting the SNMP server (other than the ssh
> filters) and the SNMP server logs those messages.
>
> _______________________________________________
> foundry-nsp mailing list
> [email protected]
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>

_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp