Re: [f-nsp] GRE Tunnel - Foundry RX-4 to FESX-648 PREM over Public Internet

Note to the list - one of our vendors pointed out that I made an error - the equipment at the corporate end is actually a FCX-648 with the Premium license.


________________________________
From: foundry-nsp <[email protected]> on behalf of Derek Maxwell <[email protected]>
Sent: Thursday, June 14, 2018 7:55 PM
To: [email protected]
Subject: [f-nsp] GRE Tunnel - Foundry RX-4 to FESX-648 PREM over Public Internet


Not sure if this is possible, but curious if anyone has any ideas for the config.


We have a few /24s that we announce in our datacenter over BGP (Foundry RX-4)

We have a statically routed /28 from AT&T at our corporate office (FESX-648 PREM as a Layer 3 switch)

Due to an IP address shortage, we need to route back a /28 carved out of our datacenter IP address space to the corporate office. I know this is doable via a GRE tunnel, but not sure where to start with a config.


Any suggestions on execution for this scenario, or am I wrong that it will work?


--Derek Maxwell

Chosen Technology Group / Chosen Payments

_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp