Re: [f-nsp] FCX High CPU Diagnostics

Are you trying to put more routes than can go into TCAM?

Does 'show ip bgp sum' show any of your BGP sessions doing FIB programming?

I don't know the FCX but a command from mlx/ce[s-r] is 'rcon lp', then run 'show task'. That will give you an idea if the LP is busy, if the command exists.

> -----Original Message-----
> From: foundry-nsp [mailto:[email protected]] On
> Behalf Of Derek Maxwell
> Sent: Thursday, 4 April 2019 5:14 AM
> To: Jörg Kost <[email protected]>; foundry-nsp <foundry-
> [email protected]>
> Subject: Re: [f-nsp] FCX High CPU Diagnostics
> 
> So, something doesn't add up here:
> 
> During a high CPU event, this is the output of show processes cpu:
> 
> show processes cpu
> Process Name   5Sec(%)   1Min(%)   5Min(%)   15Min(%)   Runtime(ms)
> ARP              0.00      0.00      0.00      0.00           1989
> BGP              0.00      0.00      0.00      0.00           2809
> DOT1X            0.00      0.00      0.00      0.00              0
> GVRP             0.00      0.00      0.00      0.00              0
> ICMP             0.00      0.00      0.00      0.00           1690
> IP               1.10      1.37      1.21      0.58         128381
> OSPF             0.00      0.00      0.00      0.00              0
> RIP              0.00      0.00      0.00      0.00             20
> STP              0.00      0.00      0.00      0.00              0
> VRRP             0.00      0.00      0.00      0.00              0
> Process Name   5Sec(%)   1Min(%)   5Min(%)   15Min(%)   Runtime(ms)
> IPv6             0.00      0.00      0.00      0.01          33559
> ICMP6            0.00      0.01      0.01      0.01          31180
> ND6              0.00      0.00      0.00      0.00           1461
> RIPng            0.00      0.00      0.00      0.00             41
> OSPFv3           0.00      0.00      0.00      0.00              0
> IPV6_RX          0.00      0.00      0.00      0.00            181
> 
> IP is the only high CPU process, but it's only at 1.1-1.37%.
> 
> 
> This is the output of show cpu:
> show cpu
> 99 percent busy, from 289 sec ago
> 1   sec avg: 99 percent busy
> 5   sec avg: 99 percent busy
> 60  sec avg: 99 percent busy
> 300 sec avg: 99 percent busy
> 
> It's 99% busy and the control plane is barely responding.
> 
> Any thoughts on a hidden process that may be monopolizing the system?
> 
> 
> On 4/3/19, 11:36 AM, "foundry-nsp on behalf of Derek Maxwell" <foundry-
> [email protected] on behalf of
> [email protected]> wrote:
> 
>     Yes and that's exactly what I was looking for. Thanks!
> 
>     Will continue to debug from here when it pops up again and see what I
> find.
> 
>     -----Original Message-----
>     From: Jörg Kost <[email protected]>
>     Sent: Wednesday, April 3, 2019 11:26 AM
>     To: Derek Maxwell <[email protected]>; foundry-nsp
> <[email protected]>
>     Subject: Re: [f-nsp] FCX High CPU Diagnostics
> 
>     Does
>     show processes cpu
>     work on the FCX?
> 
>     On 3 Apr 2019, at 19:51, Derek Maxwell wrote:
> 
>     > Anyone have any thoughts on how to diagnose intermittent 99% CPU
>     > utilization on a FCX624? We're running Layer 3 code and high CPU usage
>     > seems to be causing BGP sessions to drop.
>     >
>     _______________________________________________
>     foundry-nsp mailing list
>     [email protected]
>     http://puck.nether.net/mailman/listinfo/foundry-nsp
> 
> 
> _______________________________________________
> foundry-nsp mailing list
> [email protected]
> http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp