Re: [j-nsp] QFX5110 / EVPN-VXLAN with IPv6 underlay
Chriztoffer Hansen via juniper-nsp <[email protected]>
| Newsgroups | gmane.network.nsp.juniper |
|---|---|
| Message-ID | <CA+cYV6vLGzZ4bP7M5D=KzmRz+50tjovb-H2rCVC-RrQFQ6S0fQ@mail.gmail.com> |
Dennis, On Sat, 25 Nov 2023 at 15:26, Denis Fondras via juniper-nsp <[email protected]> wrote: > Can you give a clue ? I haven't found any information on wether it could work on > QFX5110. Looking at the two pages below. 1. The QFX5120 (assuming this also applies to the QFX5120-32C model) *only* supports the default-switch forwarding instance. 2. And IPv6 underlays seem to be *exactly not* supported for the default-switch forwarding instance. If I take this from what it reads. It looks like you cannot archive what you are trying atm. Try asking JTAC to confirm this? From: https://www.juniper.net/documentation/us/en/software/junos/evpn-vxlan/topics/concept/mac-vrf-routing-instance-overview.html#xd_4081e20476f017c2--1e138ae7-1795628658a--7dbc__subsection_mac-vrf-service-types """ EX4400, QFX5100, QFX5110, QFX5120, QFX5200, QFX5130-32CD, and QFX5700 switches, and PTX10001-36MR, PTX10004, PTX10008, PTX10016 routers These devices support only one forwarding instance (default-switch). (...) """ From: https://www.juniper.net/documentation/us/en/software/junos/evpn-vxlan/topics/topic-map/vxlan-ipv6-underlay-overview.html """ (QFX Series switches) You must use MAC-VRF routing instances with EVPN protocol and VXLAN encapsulation. We don't support IPv6 underlays with other instance types such as evpn, evpn-vpws, virtual-switch or the default switching instance. """ _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp