Re: [j-nsp] igmp snooping layer 2 querier breaks ospf in other devices
Aaron Gould via juniper-nsp <[email protected]>
| Newsgroups | gmane.network.nsp.juniper |
|---|---|
| Message-ID | <[email protected]> |
I tried to recreate the scenario in my lab with no success 21.2R3-S4.8 - in lab - problem not seen 20.2R3-S7.3 - in lab - problem not seen 19.2R3-S6.1 - in lab - problem not seen 18.3R3-S6.1 - in lab - problem not seen 17.4R2-S11 - in lab - problem not seen 17.4R2-S11 - in field - problem seen again, the problem is, when i enabled this command... set protocols igmp-snooping vlan vlan100 l2-querier source-address 10.100.4.1 ...a customer riding an l2circuit on ge-0/0/2 report to me that their multicast stops working... ospf goes down and stays in INIT... when i remove all pim and igmp, then there OSPF neighbors up and stabilizes i just don't know how running igmp inside vlan 100 with ports ge-0/0/4, 5 and 6 would have anything to do with an l2circuit on ge-0/0/2 -Aaron _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp