Re: [j-nsp] Juniper SRX MNHA

--===============4066999210357828075==
Content-Language: en-US
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit

I found the issue.  Seems it was related to the default nat state, using 
interface ip nat overload (pat).  I'm guessing since the interface ip is 
used for the translations, it didn't match the interface ip on the 
backup srx. once I changed from the default nat state, to use a pool, it 
worked!

srx01...

Session ID: 765924, Policy name: default-permit/5, HA State: Active, 
Timeout: 1800, Session State: Valid

In: 192.168.11.5/29276 --> 246.246.246.98/22;tcp, Conn Tag: 0x0, If: 
ae2.0, Pkts: 21, Bytes: 1640, HA Wing State: Active,

Out: 246.246.246.98/22 --> 123.123.123.255/1029;tcp, Conn Tag: 0x0, If: 
ae1.0, Pkts: 18, Bytes: 2712, HA Wing State: Active,

Total sessions: 1

-------------------------------------------------------------------------------------------------------------------------------------------------------

srx02... (see session is now present and marked Warm.)

Session ID: 658403, Policy name: default-permit/5, HA State: Warm, 
Timeout: 14404, Session State: Valid

In: 192.168.11.5/29276 --> 246.246.246.98/22;tcp, Conn Tag: 0x0, If: 
ae2.0, Pkts: 0, Bytes: 0, HA Wing State: Warm,

Out: 246.246.246.98/22 --> 123.123.123.255/1029;tcp, Conn Tag: 0x0, If: 
ae1.0, Pkts: 0, Bytes: 0, HA Wing State: Warm,

Total sessions: 1




-Aaron


--===============4066999210357828075==
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: base64
Content-Disposition: inline

X19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX18KanVuaXBlci1u
c3AgbWFpbGluZyBsaXN0IGp1bmlwZXItbnNwQHB1Y2submV0aGVyLm5ldApodHRwczovL3B1Y2su
bmV0aGVyLm5ldC9tYWlsbWFuL2xpc3RpbmZvL2p1bmlwZXItbnNwCg==

--===============4066999210357828075==--