Re: [j-nsp] Juniper SRX MNHA with JSC
Aaron Gould via juniper-nsp <[email protected]> Mon, 11 Aug 2025 13:04:04 -0500
| Newsgroups | gmane.network.nsp.juniper |
|---|---|
| Message-ID | <[email protected]> |
--===============2026746884008354220== Content-Language: en-US Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit Looking at a portion of the JSC client logs... ... 8/11/2025 12:45:29 PM - IpsDial: connection time interface choice,LocIpa=172.31.10.16,AdapterIndex=202,OsIndex=14 8/11/2025 12:45:29 PM - Ike: Opening connection in PATHFINDER mode : my-jsc-vpn-pro 8/11/2025 12:45:29 PM - Ike: Outgoing connect request AGGRESSIVE mode - gateway=123.123.123.225 : my-jsc-vpn-pro 8/11/2025 12:45:29 PM - Ike: ConRef=26, XMIT_MSG1_AGGRESSIVE, name=my-jsc-vpn-pro, vpngw=123.123.123.225:500 8/11/2025 12:45:29 PM - ike_phase1:send_id:ID_USER_FQDN:pid=0,port=0,[email protected] 8/11/2025 12:45:29 PM - Ike: ConRef=26, Send NAT-D vendor ID,remprt=500 Here’s where I see a difference… working here… 8/11/2025 12:45:29 PM - Ike: ConRef=26, RECV_MSG2_AGGRESSIVE, adapterindex=202,name=my-jsc-vpn-pro, remote ip:port=123.123.123.225:500,local ip:port=172.31.10.16:10952 8/11/2025 12:45:29 PM - Ike: IKE phase I: Setting LifeTime to 28800 seconds 8/11/2025 12:45:29 PM - Ike: Turning on XAUTH mode - my-jsc-vpn-pro 8/11/2025 12:45:29 PM - Ike: IkeSa1 negotiated with the following properties - 8/11/2025 12:45:29 PM - Authentication=XAUTH_INIT_PSK,Encryption=AES,Hash=SHA_256,DHGroup=19,KeyLen=256 8/11/2025 12:45:29 PM - Ike: my-jsc-vpn-pro ->Support for NAT-T version - 9 8/11/2025 12:45:29 PM - Ike: Turning on NATD mode - my-jsc-vpn-pro - 1 ... ================================================================================ ... 8/11/2025 12:24:14 PM - IpsDial: connection time interface choice,LocIpa=172.31.10.16,AdapterIndex=202,OsIndex=14 8/11/2025 12:24:14 PM - Ike: Opening connection in PATHFINDER mode : my-jsc-vpn-pro 8/11/2025 12:24:14 PM - Ike: Outgoing connect request AGGRESSIVE mode - gateway=123.123.123.225 : my-jsc-vpn-pro 8/11/2025 12:24:14 PM - Ike: ConRef=24, XMIT_MSG1_AGGRESSIVE, name=my-jsc-vpn-pro, vpngw=123.123.123.225:500 8/11/2025 12:24:14 PM - ike_phase1:send_id:ID_USER_FQDN:pid=0,port=0,[email protected] 8/11/2025 12:24:14 PM - Ike: ConRef=24, Send NAT-D vendor ID,remprt=500 Here’s where I see a difference… not working here… 8/11/2025 12:24:14 PM - Ike: ConRef=24, NOTIFY : my-jsc-vpn-pro : RECEIVED : NO_PROPOSAL_CHOSEN : 14 8/11/2025 12:24:17 PM - Ike: ConRef=24, retry timeout, resend to=123.123.123.225 8/11/2025 12:24:17 PM - Isakmp: re-sending packet to=123.123.123.225:500,size=520 8/11/2025 12:24:21 PM - Ike: Switching to TCP ENCAPSULATION in PATHFINDER_1 : my-jsc-vpn-pro ... -Aaron --===============2026746884008354220== Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: base64 Content-Disposition: inline X19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX18KanVuaXBlci1u c3AgbWFpbGluZyBsaXN0IGp1bmlwZXItbnNwQHB1Y2submV0aGVyLm5ldApodHRwczovL3B1Y2su bmV0aGVyLm5ldC9tYWlsbWFuL2xpc3RpbmZvL2p1bmlwZXItbnNwCg== --===============2026746884008354220==--