RE: Regarding WQL indications.

No we do not have the same problem for CQL , the query for CQL is different.

 

  _____  

From: [email protected] [mailto:[email protected]] 
Sent: Monday, February 08, 2010 11:20 PM
To: [email protected]; [email protected];
[email protected]
Subject: RE: Regarding WQL indications.

 

Do you have the same problem with CQL? 

 

SELECT * FROM CIM_InstModification 
WHERE SourceInstance ISA CIM_ConcreteJob 

AND SourceInstance. CIM_ConcreteJob::OperationalStatus = 17 

AND SourceInstance.CIM_ConcreteJob::OperationalStatus = 2

 

George

 

From: Karl Schopmeyer [mailto:[email protected]] 
Sent: Monday, February 08, 2010 11:03 AM
To: [email protected]; [email protected]
Subject: Re: Regarding WQL indications.

 

There is code in the parser for this but it is conditionally compiled under
PEGASSUS_SNIA_EXTENSIONS.
Karl
Thanks for your message at 06:29 AM 2/8/2010. Your message was:

Hello , 
 
I am trying to run CTP for a certain block services profile. The CTP version
is 1.3.0.
CTP is subscribes for the WQL indication 
"SELECT * FROM CIM_InstModification WHERE SourceInstance ISA CIM_ConcreteJob
AND SourceInstance.OperationalStatus = 17 AND
SourceInstance.OperationalStatus = 2"
 
But CTP never receives the indication although the desired task is completed
and the indication is dispatched to Pegasus by the.
The Pegasus version used is 2.9.1, it is complied with the SNIA_EXTENSIONS
 
I have tried to create a filter , listener and subscription for the same WQL
indication out of CTP.
I have found that the Pegasus is not able to parse the query itself.
Following is the part of the Pegasus log,
 
1265107339s-370875us: IndicationService
[1244:18446744073709551614:IndicationService.cpp:3848]: Entering method
IndicationService::_checkRequiredProperty
1265107339s-370875us: IndicationService
[1244:18446744073709551614:IndicationService.cpp:3931]: Exiting method
IndicationService::_checkRequiredProperty
1265107339s-370875us: IndicationService
[1244:18446744073709551614:IndicationService.cpp:4147]: Entering method
IndicationService::_checkPropertyWithDefault
1265107339s-370875us: IndicationService
[1244:18446744073709551614:IndicationService.cpp:4211]: Exiting method
IndicationService::_checkPropertyWithDefault
1265107339s-370875us: IndicationService
[1244:18446744073709551614:IndicationService.cpp:5130]: Entering method
IndicationService::_getQueryExpression
1265107339s-370875us: WQL [1244:18446744073709551614:WQLParser.cpp:105]:
Entering method WQLParser::parse
1265107339s-370875us: WQL [1244:18446744073709551614:WQLParser.cpp:55]:
Entering method WQLParser::parse
1265107339s-370875us: WQL [1244:18446744073709551614:WQLParser.cpp:148]:
Entering method WQLInput
1265107339s-370875us: WQL [1244:18446744073709551614:WQLParser.cpp:174]:
Exiting method WQLInput
1265107339s-370875us: WQL [1244:18446744073709551614:WQLParser.cpp:132]:
Entering method WQL_error
1265107339s-370875us: WQL [1244:18446744073709551614:WQLParser.cpp:142]:
Exiting method WQL_error
1265107339s-370875us: WQL [1244:18446744073709551614:WQLParser.cpp:114]:
Entering method WQLParser::cleanup
1265107339s-370875us: WQL [1244:18446744073709551614:WQLParser.cpp:123]:
Exiting method WQLParser::cleanup
1265107339s-370875us: WQL [1244:18446744073709551614:WQLParser.cpp:81]:
Exiting method WQLParser::parse
1265107339s-370875us: L10N
[1244:18446744073709551614:MessageLoader.cpp:417]: Entering method
MessageLoader::getMessage
1265107339s-370875us: L10N
[1244:18446744073709551614:MessageLoader.cpp:418]: Message ID =
Common.InternalException.PARSE_ERROR
1265107339s-370875us: L10N
[1244:18446744073709551614:MessageLoader.cpp:478]: Entering method
MessageLoader::openMessageFile
1265107339s-370875us: L10N
[1244:18446744073709551614:MessageLoader.cpp:507]: Exiting method
MessageLoader::openMessageFile
1265107339s-370875us: L10N
[1244:18446744073709551614:MessageLoader.cpp:439]: Entering method
MessageLoader::getMessage2
1265107339s-370875us: L10N
[1244:18446744073709551614:MessageLoader.cpp:529]: Entering method
MessageLoader::formatDefaultMessage
1265107339s-370875us: L10N
[1244:18446744073709551614:MessageLoader.cpp:540]: Exiting method
MessageLoader::formatDefaultMessage
1265107339s-370875us: L10N
[1244:18446744073709551614:MessageLoader.cpp:472]: Exiting method
MessageLoader::getMessage2
1265107339s-370875us: L10N
[1244:18446744073709551614:MessageLoader.cpp:513]: Entering method
MessageLoader::closeMessageFile
1265107339s-370875us: L10N
[1244:18446744073709551614:MessageLoader.cpp:523]: Exiting method
MessageLoader::closeMessageFile
1265107339s-370875us: L10N
[1244:18446744073709551614:MessageLoader.cpp:433]: Exiting method
MessageLoader::getMessage
1265107339s-370875us: IndicationService
[1244:18446744073709551614:IndicationService.cpp:5150]: Exiting method
IndicationService::_getQueryExpression
 
 
I have tried to create a filter , listener and subscription for the another
WQL indication ,in which the query was simpler , it did not contain any "."
, "::"  etc characters ,
For this case the WQL query parsed successfully but it gave error,
 
1265186845s-297625us: DiscardedData
[6068:18446744073709551614:CIMxmlIndicationHandler.cpp:353]:
CIMxmlIndicationHandler::handleIndication failed to deliver indication due
to Exception: Missing CIMExport HTTP header
1265186845s-297625us: IndicationHandler
[6068:18446744073709551614:CIMxmlIndicationHandler.cpp:355]: Exiting method
CIMxmlIndicationHandler::handleIndication()
1265186845s-297625us: IndicationHandler
[6068:18446744073709551614:IndicationHandlerService.cpp:363]: Exiting method
IndicationHandlerService::__loadHandler()
1265186845s-297625us: L10N
[6068:18446744073709551614:MessageLoader.cpp:417]: Entering method
MessageLoader::getMessage
1
 
Can somebody please let me know that is there a pacth or fix that needs to
be applied in order to get the WQL indications working with the open
peagsus.
 
 
_____________________________________________________________________ 

This e-mail message may contain proprietary, confidential or legally
privileged information for the sole use of the person or entity to whom this
message was originally addressed. Any review, e-transmission dissemination
or other use of or taking of any action in reliance upon this information by
persons or entities other than the intended recipient is prohibited. If you
have received this e-mail in error kindly delete this e-mail from your
records. If it appears that this mail has been forwarded to you without
proper authority, please notify us immediately at [email protected] and
delete this mail. 
_____________________________________________________________________ 

Karl Schopmeyer                   Inova Development Inc.
305 Spring Creek Village, Suite 475 -  Dallas TX, 75248 USA
EMAIL: [email protected]       FAX: 1-972-239-0326
Phone 1-972-814-5581
Skype: kschopmeyer         Skype Phone: (214) 556-5971


_____________________________________________________________________ 

This e-mail message may contain proprietary, confidential or legally privileged information for the sole use of the person or entity to whom this message was originally addressed. Any review, e-transmission dissemination or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited. If you have received this e-mail in error kindly delete this e-mail from your records. If it appears that this mail has been forwarded to you without proper authority, please notify us immediately at [email protected] and delete this mail.
_____________________________________________________________________