RE: Indication with OperationContext Object failed (in Pegasus 2.9.1)
"Manjunath Marlabeeti" <[email protected]>
| Newsgroups | gmane.network.open-pegasus.general |
|---|---|
| Message-ID | <[email protected]> |
Hi Venkat,
Thanks for the reply.
Based on your suggestion I checked handler and filter values from
Genrateindication and which are registerd with the cimserver. Below are
the values.
(I have changed hardcoded the IP from 1.1.1.1 to 192.168.111.6)
Below 1 and 2 are the values of printf in Generateindication function
after Handler and filter constructions.( printf("\nHandlerString
%s\n",temp.c_str());)
1) filterString
root/PG_InterOp:CIM_IndicationFilter.CreationClassName="CIM_IndicationFi
lter",Name="Filter20192.168.111.61192.168.111.6|1|1@",SystemCreationClas
sName=
"CIM_ComputerSystem",SystemName="CR-IN-MANJU"
2) HandlerString
root/PG_InterOp:CIM_IndicationHandlerCIMXML.CreationClassName="CIM_Indic
ationHandlerCIMXML",Name="Handler20192.168.111.61192.168.111.6|1|1@",Sys
t
emCreationClassName="CIM_ComputerSystem",SystemName="CR-IN-MANJU"
3) after execution of Java client
values from command : cimsub -l s
NAMESPACE root/PG_InterOp
FILTER root/PG_InterOp:Filter20192.168.111.61192.168.111.6|1|1@
HANDLER
root/PG_InterOp:CIM_IndicationHandlerCIMXML.Handler20192.168.111.61192.1
68.111.6|1|1@
STATE Enabled
with the above values I could not find the exact problem because
corresponding handler and filter values are same.
please could you suggest me a solution based on the above values.
Thanks,
Manjunath.M
From: Venkateswara R Puvvada [mailto:[email protected]]
Sent: Friday, May 21, 2010 11:54 AM
To: Manjunath Marlabeeti
Cc: [email protected]
Subject: Re: Indication with OperationContext Object failed (in Pegasus
2.9.1)
Manjunath,
If the indication provider sets SubscriptionInstanceNamesContainer in
the operation context, the subset of subscriptions specified by the
indication provider should be part of the actual matched subscriptions
for the indication. Any subscription included by the provider but not
containing in the matched subscriptions list is ignored. In your case,
the subscription name you have specified in the provider does not seem
to be in the actual subscriptions matched for the indication.
Venkat
"Manjunath Marlabeeti" <[email protected]>
19/05/2010 18:07
To
<[email protected]>
cc
Subject
Indication with OperationContext Object failed (in Pegasus 2.9.1)
Hi,
I have written a simple indication provider it sends the indications to
java client.
While execution I observed one thing that in the below function if I
deliver the indication without context object then the indications are
received by the java client.
If I deliver with OperationContext object then indications are not
received by the Java client. But my requirement is indications needs to
send with OperationContext object.
Here I am copying the function
Here is the function call
GenerateIndication(_handler,CIMName("CRM_Indication"),objBackInd,strObje
ct,"1.1.1.1","1","1.1.1.1|1|1@");
//objBackInd is an indication object
void GenerateIndication(IndicationResponseHandler *ptrObjHandler, const
CIMName objMethodName,CIMInstance objBackInd,string &strObject,string
IP,string ID,string operationID)
{
char buffer[32];
sprintf(buffer, "%d", G_ui32NextUid++);
objBackInd.addProperty(CIMProperty
("IndicationIdentifier",String(buffer)));
char stringTime[MAX_CHARS];
time_t currentTime=time(NULL);
sprintf(stringTime,"%ld",currentTime);
AddProperty("IndicationTime",stringTime,CMC_STRING,strObject);
CIMIndication cimIndication (objBackInd);
String filterString;
string temp;
Array <CIMObjectPath> subscriptionInstanceNames;
Array <CIMKeyBinding> subscriptionKeyBindings;
string
filterConstruction="root/PG_InterOp:CIM_IndicationFilter.CreationClassNa
me=\"CIM_IndicationFilter\",Name=\"Filter20";
filterConstruction=filterConstruction+IP+ID+operationID+"\",SystemCreati
onClassName=\"";
filterString.append(filterConstruction.c_str());
filterString.append (System::getSystemCreationClassName ());
filterString.append ("\",SystemName=\"");
filterString.append (System::getFullyQualifiedHostName ());
filterString.append ("\"");
subscriptionKeyBindings.append (CIMKeyBinding
("Filter",filterString, CIMKeyBinding::REFERENCE));
temp = filterString.getCString();
printf("\nfilterString %s\n",temp.c_str());
string
HandlerConstruction="root/PG_InterOp:CIM_IndicationHandlerCIMXML.Creatio
nClassName=\"CIM_IndicationHandlerCIMXML\",Name=\"Handler20";
HandlerConstruction = HandlerConstruction + IP
+ID+operationID+"\",SystemCreationClassName=\"";
String handlerString;
handlerString.append(HandlerConstruction.c_str());
handlerString.append
(System::getSystemCreationClassName ());
handlerString.append ("\",SystemName=\"");
handlerString.append
(System::getFullyQualifiedHostName ());
handlerString.append ("\"");
subscriptionKeyBindings.append (CIMKeyBinding
("Handler", handlerString, CIMKeyBinding::REFERENCE));
temp=handlerString.getCString();
printf("\nHandlerString %s\n",temp.c_str());
CIMObjectPath subscriptionPath ("",
CIMNamespaceName ("root/PG_InterOp"),
CIMName ("CIM_IndicationSubscription"),
subscriptionKeyBindings);
subscriptionInstanceNames.append
(subscriptionPath);
OperationContext context;
context.insert (SubscriptionInstanceNamesContainer
(subscriptionInstanceNames));
objBackInd.addProperty
(CIMProperty
("IpAddress",String(IP.c_str())));
objBackInd.addProperty
(CIMProperty
("OperationId",String(operationID.c_str())));
objBackInd.addProperty
(CIMProperty
("Uid",String(ID.c_str())));
//with Context object indications are not getting received by JAVA clien
without Context java client is reciving indication
//ptrObjHandler->deliver (objBackInd);
ptrObjHandler->deliver (context, objBackInd);
}
Please can anyone correct me where exactly I am doing wrong.
Thanks,
Manjunath.M