Re: Custom SNMP Collection

Here’s the output of the snpwalk:

.1.3.6.1.4.1.45501.1.3.1.0 = INTEGER: 0
.1.3.6.1.4.1.45501.1.3.2.0 = INTEGER: 1
.1.3.6.1.4.1.45501.1.3.3.0 = INTEGER: 1
.1.3.6.1.4.1.45501.1.3.4.0 = STRING: "13.8"
.1.3.6.1.4.1.45501.1.3.5.0 = STRING: "00.0"
.1.3.6.1.4.1.45501.1.3.6.0 = STRING: "00.0"
.1.3.6.1.4.1.45501.1.3.7.0 = STRING: "00.0"
.1.3.6.1.4.1.45501.1.3.8.0 = STRING: "+25.6"
.1.3.6.1.4.1.45501.1.3.9.0 = INTEGER: 0
.1.3.6.1.4.1.45501.1.3.10.0 = STRING: "B:13.8 V I:00.0AMAINS:ON i:00.0A"
.1.3.6.1.4.1.45501.1.3.11.0 = STRING: "13.80"
.1.3.6.1.4.1.45501.1.3.12.0 = STRING: "00.00"
.1.3.6.1.4.1.45501.1.3.13.0 = STRING: "00.00"
.1.3.6.1.4.1.45501.1.3.14.0 = STRING: "00.00"
.1.3.6.1.4.1.45501.1.3.14.0.0 = No more variables left in this MIB View (It is past the end of the MIB tree)

Gavin

From: Ronald Roskens <[email protected]>
Reply-To: General OpenNMS Discussion <[email protected]>
Date: Thursday, 27 September 2018 at 19:23
To: General OpenNMS Discussion <[email protected]>
Subject: Re: [opennms-discuss] Custom SNMP Collection

Guessing that your mibObj oid’s contain the index (.0 at the end) in them?

If you send the output from an snmp walk, (run /opt/opennms/contrib/snmpwalk-debug.sh $host $community .1.3.6.1.4.1.45501.1.3) that would give us the output from the snmp table containing those values.

Ron


-- 
Gavin Hill  |  Director
m: +27 83 601 8181
t: +27 10 020 5959
   

 
 
On Sep 27, 2018, at 6:20 AM, Gavin Hill <[email protected]<mailto:[email protected]>> wrote:

I’m trying to collect a temperature and battery voltage from an SNMP device.

I have added a datacollection group under “default” to datacollection-confg.xml

<include-collection dataCollectionGroup="MicroInstruments"/>

I have added a file under datacollection/

<datacollection-group xmlns="http://xmlns.opennms.org/xsd/config/datacollection" name="MicroInstruments">
   <group name="battery" ifType="ignore">
      <mibObj oid=".1.3.6.1.4.1.45501.1.3.4.0" instance="0" alias="batteryV" type="octetstring"/>
   </group>
   <group name="temp" ifType="ignore">
      <mibObj oid=".1.3.6.1.4.1.45501.1.3.8.0" instance="0" alias="temperature" type="octetstring"/>
   </group>
   <systemDef name="MicroInstruments">
      <sysoidMask>.1.3.6.1.4.1.45501</sysoidMask>
      <collect>
         <includeGroup>battery</includeGroup>
         <includeGroup>temp</includeGroup>
      </collect>
   </systemDef>
</datacollection-group>

The node falls under the default “example1” package in collectd-configuration.xml

I’m still not seeing any data collected though.  What part am I missing?

Gavin
--
Gavin Hill  |  Director
m: +27 83 601 8181<tel:+27%2083%20601%208181>
t: +27 10 020 5959<tel:+27%2010%20020%205959>
  <Mail Attachment.jpeg><mailto:%28%21Email%21%29><Mail Attachment.jpeg><https://www.linkedin.com/company/highpeak-pty-ltd/><Mail Attachment.jpeg><skype:%28%21Email%21%29><Mail Attachment.jpeg><https://www.highpeak.co.za/>

<Mail Attachment.jpeg>
_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-discuss mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-discuss

_______________________________________________
Please read the OpenNMS Mailing List FAQ:
http://www.opennms.org/index.php/Mailing_List_FAQ

opennms-discuss mailing list

To *unsubscribe* or change your subscription options, see the bottom of this page:
https://lists.sourceforge.net/lists/listinfo/opennms-discuss