[S] Change in openvpn[master]: GHA: Maintenance update June 2026

"cron2 \(Code Review\) via Openvpn-devel" <[email protected]>
Newsgroups gmane.network.openvpn.devel
Message-ID <[email protected]> 
cron2 has submitted this change. ( http://gerrit.openvpn.net/c/openvpn/+/1710?usp=email )

Change subject: GHA: Maintenance update June 2026
......................................................................

GHA: Maintenance update June 2026

Contains the following renovate updates:
- chore(deps): update github actions
- chore(deps): update vcpkg digest to 75672db
- chore(deps): update dependency aws/aws-lc to v5
- chore(deps): update dependency libressl/portable to v4.3.2

Change-Id: I11fc104878ba244c5be04ce8019695b6892c4457
Signed-off-by: Frank Lichtenheld <[email protected]>
Acked-by: Arne Schwabe <[email protected]>
Gerrit URL: https://gerrit.openvpn.net/c/openvpn/+/1710
Message-Id: <[email protected]>
URL: https://www.mail-archive.com/[email protected]/msg37138.html
Signed-off-by: Gert Doering <[email protected]>
---
M .github/workflows/build.yaml
M .github/workflows/coverity-scan.yml
M .github/workflows/doxygen.yml
M .github/workflows/test-ssllib.yml
4 files changed, 20 insertions(+), 20 deletions(-)




diff --git a/.github/workflows/build.yaml b/.github/workflows/build.yaml
index b530fcc..323645a 100644
--- a/.github/workflows/build.yaml
+++ b/.github/workflows/build.yaml
@@ -14,7 +14,7 @@
           sudo apt update && sudo apt install -y python3-pip
           pip3 install pre-commit
       - name: Checkout OpenVPN
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
       - name: Run clang-format
         run: pre-commit run -a --show-diff-on-failure || true
       - name: Check for changes
@@ -43,11 +43,11 @@
       VCPKG_ROOT: ${{ github.workspace }}/vcpkg
       VCPKG_INSTALLED_DIR: ${{ github.workspace }}/vcpkg/installed
       VCPKG_BINARY_SOURCES: clear;default,readwrite
-      VCPKG_GIT_COMMIT_ID: 031f4afe03be385aee354f15be6e6b1fe57497c7
+      VCPKG_GIT_COMMIT_ID: 75672db6bd812b060482b0f00b5a16b18a0c0f07
     steps:
       - name: Checkout OpenVPN
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
-      - uses: lukka/get-cmake@7bfc9baacbbdcb5e37957ad05c3546b3e222be3c # v4.3.2
+        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+      - uses: lukka/get-cmake@591817e96fcad43505fb4eae36172462abb3a42e # v4.3.3
       - name: Setup vcpkg
         uses: lukka/run-vcpkg@b1a0dd252f06b9e25b3c022a9a03bd7a427fb6a2 # v11.6
         with:
@@ -84,14 +84,14 @@
     env:
       VCPKG_ROOT: ${{ github.workspace }}/vcpkg
       VCPKG_BINARY_SOURCES: clear;default,readwrite
-      VCPKG_GIT_COMMIT_ID: 031f4afe03be385aee354f15be6e6b1fe57497c7
+      VCPKG_GIT_COMMIT_ID: 75672db6bd812b060482b0f00b5a16b18a0c0f07
     steps:
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y mingw-w64 unzip build-essential wget python3-docutils man2html-base
       - name: Checkout OpenVPN
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
 
-      - uses: lukka/get-cmake@7bfc9baacbbdcb5e37957ad05c3546b3e222be3c # v4.3.2
+      - uses: lukka/get-cmake@591817e96fcad43505fb4eae36172462abb3a42e # v4.3.3
       - name: Setup vcpkg
         uses: lukka/run-vcpkg@b1a0dd252f06b9e25b3c022a9a03bd7a427fb6a2 # v11.6
         with:
@@ -142,7 +142,7 @@
     name: "mingw unittest ${{ matrix.test }} - ${{ matrix.arch }} - ${{ matrix.build }} - OSSL"
     steps:
       - name: Checkout OpenVPN
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
       - name: Retrieve mingw unittest
         uses: actions/download-artifact@3e5f45b2cfb9172054b4087a40e8e0b5a5461e7c # v8.0.1
         with:
@@ -183,7 +183,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev libcap-ng-dev libnl-genl-3-dev linux-libc-dev man2html libcmocka-dev python3-docutils libtool automake autoconf ${SSLPKG} ${PKCS11PKG}
       - name: Checkout OpenVPN
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -213,7 +213,7 @@
       - name: Install dependencies
         run: sudo apt update && sudo apt install -y liblzo2-dev libpam0g-dev liblz4-dev libcap-ng-dev libnl-genl-3-dev linux-libc-dev man2html clang libcmocka-dev python3-docutils libtool automake autoconf
       - name: Checkout OpenVPN
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
       - name: autoconf
         run: autoreconf -fvi
       - name: configure
@@ -253,7 +253,7 @@
       - name: Install dependencies
         run: brew install ${{matrix.ssllib}} lzo lz4 man2html cmocka libtool automake autoconf
       - name: Checkout OpenVPN
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
       - name: Set environment
         run: |
           cat >>$GITHUB_ENV <<EOF;
@@ -283,12 +283,12 @@
       env:
         BUILD_CONFIGURATION: Release
         VCPKG_BINARY_SOURCES: clear;default,readwrite
-        VCPKG_GIT_COMMIT_ID: 031f4afe03be385aee354f15be6e6b1fe57497c7
+        VCPKG_GIT_COMMIT_ID: 75672db6bd812b060482b0f00b5a16b18a0c0f07
 
       runs-on: windows-2025
       steps:
-      - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
-      - uses: lukka/get-cmake@7bfc9baacbbdcb5e37957ad05c3546b3e222be3c # v4.3.2
+      - uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
+      - uses: lukka/get-cmake@591817e96fcad43505fb4eae36172462abb3a42e # v4.3.3
 
       - name: Install rst2html
         run: python -m pip install --upgrade pip docutils
@@ -342,7 +342,7 @@
       ovpnlibdesc: LibreSSL
       # versioning=semver-coerced
       ghrepo: libressl/portable
-      gitref: v4.2.1
+      gitref: v4.3.2
       libconfigure: "LIBRESSL_GIT_OPTIONS=--no-single-branch ./autogen.sh && ./configure --prefix=$LIBPREFIX"
 
   openssl4:
@@ -376,7 +376,7 @@
       ovpnlibdesc: AWS-LC
       # versioning=semver-coerced
       ghrepo: aws/aws-lc
-      gitref: v1.70.0
+      gitref: v5.0.0
       libconfigure: cmake -B build -GNinja -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX="$LIBPREFIX" -DBUILD_SHARED_LIBS=1
       libmake: cmake --build build
       libinstall: sudo cmake --install build
diff --git a/.github/workflows/coverity-scan.yml b/.github/workflows/coverity-scan.yml
index 1eec1ed..105f23e 100644
--- a/.github/workflows/coverity-scan.yml
+++ b/.github/workflows/coverity-scan.yml
@@ -25,7 +25,7 @@
 
       - name: Checkout OpenVPN
         if: steps.check_submit.outputs.cache-hit != 'true'
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
 
       - name: Download Coverity Build Tool
         if: steps.check_submit.outputs.cache-hit != 'true'
diff --git a/.github/workflows/doxygen.yml b/.github/workflows/doxygen.yml
index 30988b5..3755b92 100644
--- a/.github/workflows/doxygen.yml
+++ b/.github/workflows/doxygen.yml
@@ -11,7 +11,7 @@
     runs-on: ubuntu-24.04
     if: ${{ github.repository_owner == 'openvpn' || github.event_name == 'workflow_dispatch' }}
     steps:
-      - uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+      - uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
         with:
           path: openvpn
 
diff --git a/.github/workflows/test-ssllib.yml b/.github/workflows/test-ssllib.yml
index c6a2e44..d8178a7 100644
--- a/.github/workflows/test-ssllib.yml
+++ b/.github/workflows/test-ssllib.yml
@@ -77,7 +77,7 @@
           key: ${{matrix.os}}-${{inputs.libname}}-${{matrix.build }}-${{inputs.gitref}}
       - name: "${{inputs.libname}}: checkout"
         if: steps.ssllib-cache.outputs.cache-hit != 'true'
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
         with:
           submodules: recursive
           path: ${{inputs.libname}}
@@ -98,7 +98,7 @@
       - name: Run ldconfig
         run: sudo ldconfig
       - name: "OpenVPN: checkout"
-        uses: actions/checkout@de0fac2e4500dabe0009e67214ff5f5447ce83dd # v6.0.2
+        uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10 # v6.0.3
       - name: "OpenVPN: autoreconf"
         run: autoreconf -fvi
       - name: "OpenVPN: configure"

-- 
To view, visit http://gerrit.openvpn.net/c/openvpn/+/1710?usp=email
To unsubscribe, or for help writing mail filters, visit http://gerrit.openvpn.net/settings?usp=email

Gerrit-MessageType: merged
Gerrit-Project: openvpn
Gerrit-Branch: master
Gerrit-Change-Id: I11fc104878ba244c5be04ce8019695b6892c4457
Gerrit-Change-Number: 1710
Gerrit-PatchSet: 2
Gerrit-Owner: flichtenheld <[email protected]>
Gerrit-Reviewer: plaisthos <[email protected]>
Gerrit-CC: openvpn-devel <[email protected]>

_______________________________________________
Openvpn-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/openvpn-devel
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.