OpenVPN 3 Linux v22_dev released
David Sommerseth via Openvpn-devel <[email protected]> Thu, 20 Jun 2024 23:08:15 +0200
| Newsgroups | gmane.network.openvpn.devel,gmane.network.openvpn.user |
|---|---|
| Message-ID | <[email protected]> |
OpenVPN 3 Linux v22_dev (Limited Release)
This is a limited release primarily targeting Fedora 39 and newer plus
Ubuntu 24.04. Other Linux distributions shipping glib2 version 2.76
or newer will also benefit from this release.
This release contains a massive re-factoring of the D-Bus integration
layer with glib2. The glib2 2.76 and newer releases contains several
internal changes which broke the D-Bus implementation layer in
OpenVPN 3 Linux v21 and older releases [1]. To fix this, it was decided
to split out the base D-Bus integration into a new standalone library
which OpenVPN 3 Linux will depend on. This new project is called
GDBus++.
[1] <https://github.com/OpenVPN/openvpn3-linux/issues/171>
The GDBus++ library makes extended use of multi-threading when
processing D-Bus method calls and implements modern C++17 approaches
when handling requests to registered D-Bus objects. It has also been
a strong focus on getting rid of as much of various glib2 warnings
which could occasionally appear in prior OpenVPN 3 Linux releases.
There are most likely a still a lot more room for improvements to both
the new GDBus++ and the upgraded OpenVPN 3 Linux code, which is why
this release targets a more limited release scope.
This release has only been through the full QA validation on Fedora 39,
Fedora 40 and Ubuntu 24.04.
That said, this new code can be made available for all the officially
supported RPM distributions by enabling a "development snapshots" repository.
But this repository will also not have the same QA guarantees as the
official stable repositories.
On a development note, this project has now migrated to use Meson [2] as
the build system. The autoconf/automake build system is now completely
removed. The Meson build system has turned out to be way simpler to
use and configure than autotools ever was, especially from a developers
point of view.
[2] <https://mesonbuild.com/>
There are unfortunately a few known issues which is targeted for
the coming v23 release:
- AWS VPC integration is not yet ready, so this add-on is currently
not available in this v22_dev release. This is targeted for v23.
- Shell completion may list duplicated options in some cases
- openvpn3-admin journal --since has a time zone related issue
and may not list all log events within the closest hours.
Other changes worth mentioning with this release:
* Improvement: Upgrade to OpenVPN 3 Core library v3.8.5
This upgrade contains several bug fixes related to the option
parser, mostly issues reported by a wide range of users. In
addition to incorrect behaviour with the stub compression when
the --compress option was used.
* Improvement: openvpn3-admin journal --since argument
The --since argument can now use the keywords 'today' and
'yesterday'.
* Bug fix: openvpn3-admin log-service would not change some settings
On some distributions, the --dbus-details and other boolean flags
was not properly changed when requested. This has been improved.
Credits
-------
Finally, it is needed to give a HUGE THANK YOU to all the community
testers which installed and tested rolling development snapshots during
the development of this release. Without all this testing, we would
not have the same confidence in this release as we have now. All your
help and feedback has been really valuable and helpful during this the
development phase.
Supported Linux distributions
-----------------------------
- Fedora: 39, 40, Rawhide
- Ubuntu: 24.04, (amd64, arm64)
- Red Hat Enterprise Linux 8, 9 (no QA, development snapshot only [3])
Installation and getting started instructions can be found here:
<https://community.openvpn.net/openvpn/wiki/OpenVPN3Linux>
The v23 release will also include support for all distributions again,
including Debian 12. Debian 11, Red Hat Enterprise Linux 7 and
Ubuntu 23.10 will go EOL in just a few days or weeks and will no longer
be supported.
[3] Fedora Copr development snapshots:
<https://copr.fedorainfracloud.org/coprs/dsommers/openvpn3-devsnapshots/>
--
kind regards,
David Sommerseth
OpenVPN Inc
---- Source tarballs ---------------------------------------------------
* OpenVPN 3 Linux v22_dev
<https://swupdate.openvpn.net/community/releases/openvpn3-linux-22_dev.tar.xz>
<https://swupdate.openvpn.net/community/releases/openvpn3-linux-22_dev.tar.xz.asc>
* GDBus++ v1
<https://swupdate.openvpn.net/community/releases/gdbuspp-1.tar.xz>
<https://swupdate.openvpn.net/community/releases/gdbuspp-1.tar.xz.asc>
---- SHA256 Checksums --------------------------------------------------
ad8f373814bfbefd12f9824d57badef4535f6c1fde68d2c73d7ee14863547cb6 openvpn3-linux-22_dev.tar.xz
32af8668130966959319ccd2769146090de5eab73a98612add6a5f9a99ff6921 openvpn3-linux-22_dev.tar.xz.asc
e53e47f8529109e138d59ff38374818692b6fe26f2fee2d00642bba272e117a3 gdbuspp-1.tar.xz
eff710210822b8127ec7f2f9b6879ac8150d2c74099c498d4811a2668d7f9670 gdbuspp-1.tar.xz.asc
---- git references ----------------------------------------------------
git repositories:
- OpenVPN 3 Linux
<https://codeberg.org/OpenVPN/openvpn3-linux> (PRIMARY)
<https://gitlab.com/openvpn/openvpn3-linux> (code-only mirror)
<https://github.com/OpenVPN/openvpn3-linux> (code-only mirror)
git tag: v22_dev
git commit: 2ec1ebce758b1d521498c05c55e355b043c3d7f1
- GDBus++
<https://codeberg.org/OpenVPN/gdbuspp/> (PRIMARY)
<https://gitlab.com/openvpn/gdbuspp/> (code-only mirror)
<https://github.com/openvpn/gdbuspp/> (code-only mirror)
git tag: v1
git commit: 7d80f553d64ec64790327b3e18b68f02448ca84c
---- Changes from v21 to v22_dev ---------------------------------------
David Sommerseth (324):
ovpn3cli/admin: log-service lacked initial state and init
ovpn3cli/admin: Add today/yesterday to journal --since
codestyle: Use default lambda scope indentation
processwatch: Remove the processwatch.hpp feature
idlecheck: Remove IdleChecker implementation for GDBus++ refactoring
build: Add bare meson build setup
GDBus++: First step in migrating to the new D-Bus implementation
GDBus++: Rework constants setup for OpenVPN 3 Linux
GDBus++: Migrate the log/proxy-log.hpp implementation
build: Add bare meson setup for generating man pages
build: Install the base D-Bus policy
build: Replace individual D-Bus auto-start service files with a template
GDBus++: Migrate openvpn3-service-backendstart
build: Add some log handling into the internal shared common library
GDBus++: Migrate D-Bus proxy code for net.openvpn.v3.config
client: Simplify StatusEvent() constructors
build: Extend version extraction to include a few git flags
build: Build and install SELinux policies via Meson
GDBus++: Partial migration of netcfg code required to build VPN client backend
common: Extend RequiresQueue with callback functionality
GDBus++: Complete migration of StatusEvent()
GDBus++: Kick out THROW_LOGEXCEPTION() macro
GDBus++: GDBus++: Complete migration of LogEvent()
GDBus++/LogSender: Use SignalDeclaration() methods setting up signals
GDBus++/common: Improve RequiresQueue, avoid static_cast<>()
GDBus++: First stab at migrating openvpn3-service-client
build/selinux: Fix wrongly behaving SELinux build detection
build: Fix issues with missing sd_id128 variable in meson
build: Prepare the ground for building dco-keyconfig.proto
GDBus++/common: Migrate PlatformInfo
GDBUs++/sessionmgr: Initial migration of SessionManager::Event()
GDBus++/netcfg: Initial migration of NetCfg:DNS::ResolverSettings()
netcfg: Enforce smart-pointer usage for NetCfg::DNS::ResolverSettings()
GDBus++/netcfg: Extend NetCfgChangeType with GDBus++ glib2 helpers
GDBus++: Migrate the unit tests
client/log: Rewrite the Core library D-Bus log implementation
client: Fix minor coding style issues in ConnectionStatDetails
common: Refactor build-config.h inclusion in MachineID
Avoid including build-config.h in header files
GDBus++: Complete migration of NetCfg::DNS::SettingsManager
common: Add missing sstream include file in configfileparser.hpp
GDBus++: Migrated NetCfgSubscriptions
client: Minor code cleanup in core-client.hpp
GDBus++: Migrate NetCfgSignals
GDBus++: Extend NetCfgProxy::Device with DCO support
GDBus++/client: Fix dco and log_level property handling
client: Remove pointless debug logging of the current run status
client: Add debug logging when validate_sender() rejects a caller
build: Use --prod-version as Meson project version
build: Replace hard-coded -Werror with werror option
client/core: Rename 'signal' object to 'signals'
client/core: Reorder and fix #include file related challenges
client/core: Relocate statistics.hpp include
client/core: Clean up some #include hierarchy in core-client/core-client-netcfg
build: Add libnl-3.0 as a dependency
build: Add debug_internal build configuration flag
client: Add BackendSignals::Create() static helper function
log/proxy: Use DBus::Object::Path instead of std::string
configmgr/proxy: Use DBus::Object::Path instead of std::string
client: Use DBus::Object::Path in NetCfgTunBuilder::netcfg_get_device_path()
client: Cleanup leftovers in NetCfgTunBuilder for ovpncli-netcfg
client: Add debug logging when requesting NetCfg Cleanup()
netcfg/proxy: Use DBus::Object::Path instead of std::string
tests/netcfg: Migrate netcfg-changeevent-selftest to GDBus++/meson
netcfg: Migrate NetCfgChangeEvent fully to GDBus++
tests/netcfg: Migrate netcfg-proxy-unit to GDBus++/Meson
tests/netcfg: List D-Bus paths if the "Re-fetching" fails
core: Update to OpenVPN 3 Core Library v3.8.4
netcfg/dns: Migrate NetCfg::DNS::resolved proxy to GDBus++
netcfg/dns: Refactor the SettingsManager and ResolverBackendInterface
netcfg/dns: Refactor NetCfg::DNS::ResolvConfFile
netcfg/dns: Fix NetCfg::DNS::ResolverSettings::operator<<() behaviour
netcfg/dns: Refactor NetCfg::DNS::SystemdResolved
netcfg/build: Include NetCfgChangeType into the static netcfg library
build: Move some netcfg components out of the static libnetcfg library
GDBus++: Migrate openvpn3-service-netcfg (non-DCO)
selinux: Allow openvpn3-service-netcfg to use syslog
client: Fix incorrect empty session_path property
client: Explicitly set the scope on a few Core library types
netcfg/dns: Fix glib2 GVariant ref counting issues
netcfg: Preserve a pointer to the LogWriter object in NetCfgDevice
netcfg: Return the proper data type in DcoAvailable
netcfg: GDBus++: Complete migration of openvpn3-service-netcfg
vendor: Remove googletest as a git submodule
netcfg: Check the results when preserving capabilities
netcfg/dns: systemd-resolved SetDefaultRoute is a method
netcfg/dns: Detect unsupported SetDefaultRoute feature in systemd-resolved
sessionmgr: Replace GetIntrospection() with SessionManager::Event::SignalDeclaration()
sessionmgr: Minor cleanups of SessionManager::Event
log: Make the StatusChange signal optional in LogSender
log: Make LogWriter::Ptr a std::shared_ptr
netcfg: Use DBus::Object::Path in method_fetch_interface_list()
client: Add AttentionReq class
GDBus++/tests: Migrate signal-listener
configmgr/proxy: Do an extra object existence check in ctor
dbus: Add a GDBus++ DBus::Object extension - Object::ACL
core: Update to OpenVPN 3 Core Library v3.8.5
Provide operator<<() function for OpenVPN 3 Linux specific types
log: Fix incorrect data type in LogProxy::ProxyLogEvents()
python: Migrate openvpn3.constants generator to Meson
sessionmgr: Remove not needed arg in SessionManager::Event::SignalDeclaration()
build: Include dbus/path.cpp into the common static library
sessionmgr: Adding SessionManager::NewTunnelQueue infrastructure
sessionmgr: Add generic code for sending session and manager signals
sessionmgr: GDBus++ migration of the openvpn3-service-sessionmgr
Codestyle refresh of migrated code
docs: Update openvpn3-service-sessionmgr man page
docs: Update D-Bus documentation for net.openvpn.v3.sessions
vendor: Upgrade ASIO to v1.30.2
build: Relocate build-version.h for dist packaging
build: Fix scripts/get-version, use proper path for build-version.h
build: Generate and install openvpn3/constants.h
netcfg/dns: Fix missing virtual destructor compiler warnings
configmgr: Fix warnings about dangling references
gdbus++: Simplified DBus::Service API
tests: Extend request-queue-service with file logging
tests: Add request-queue-test
tests: Make PlatformInfo unit-test run without D-Bus
tests: Add more Meson test cases
tests: Classify already declared Meson test cases
events: Relocate AttentionReq and StatusEvent
events: Relocate LogEvent into Events::Log
dbus: Codestyle cleanup in GDBusPP::Object::Extension::ACL
dbus/signals: Refactor AttentionRequired and StatusChange signals
sessionmgr: Cleanup in sessionmgr-events.hpp
log: Refactor LogFilter to Log::EventFilter
dbus/signals: Implement ::Signals::Log
dbus: Clean up minor issues in DBusRequiresQueueProxy
dbus: Extend DBusRequiresQueueProxy to allow proxy assignment later on
sessionmgr: Migrate the Session Manager D-Bus proxy client to GDBus++
dbus/signals: Implement Signals::ReceiveLog
log: Clarify DBus::Signal::Group::Create() call destination
signals/statuschange: Harden StatusChange::GetLastStatusChange() in empty cases
client/backendstart: Rework how StatusChange signals are sent
client: Rework how backend VPN client sends StatusChange/AttentionRequired
client: Rework RegistrationRequest signal sending
sessionmgr: Refactor out StatusChange calls via LogSender
sessionmgr: Fix a few minor codestyle related issues
log: Remove StatusChange signal handling from LogSender
log: Remove classes and features which is no longer needed
tests: Migrate logservice1 debug/test tool to GDBus++
tests: Extend logservice1 with logtag settings support
build: Refactor ENABLE_DEBUG macro in netcfg-dns-direct-file-selftest
build: Remove debug_internal setting
common: Add a '[DCO]' tag in get_version() string when DCO enabled
build: Redo the ENABLE_OVPNDCO macro setup
log: Clean up LogTag
log: Extend Log::EventFilter with a smart-pointer creator
log: Cleanup LogMetaData and LogMetaDataValue
events: Extend Events::Log() to also carry signal sender details
signals: Extend Signals::ReceiveLog() to pass signal sender details
log: Simplify the LogWriter API slightly
log: LogWriter::Write() implementations must check if metadata is valid
log/proxy: LogServiceProxy::Detach() must wait for a reply
log: Make more Log::EventFilter methods publicly available
log: Improve misleading Log::EventFilter error message
client: Signals sent should not change the D-Bus path
client: Backendstarter can use a bit longer idle-exit
sessionmgr: Improve retrieve sessions helper method
dbus/signals: std::move() the callback lambda to the signal handler
events/log: Extend Events::Log to carry a LogTag::Ptr
log: Simplify LogWriter API - remove PrependMeta() + AddLogTag()
log: Rework passing of LogTag to the LogWriter backend
signals/statuschange: Implement Signals::ReceiveStatusChange
sessionmgr: Disable log forwarding for sessions closing
GDBus++/log: Migration of net.openvpn.v3.log / openvpn3-service-log
sessionmgr: Add missing session_name property in Session objects
log: Initialize logstream pointer properly
docs: Create, build and install man pages
log: Remove unused namespace in openvpn3-service-log.cpp
build/tests: Build the cmdparser-test program
common: Remove RCPtr from cmdargparser.[ch]pp
common/cmdargparser: Pass std::string by reference
common/cmdargparser: Replace typedef with using for consistency
GDBus++/ovpn3cli: Start migration of openvpn3 and openvpn3-admin cli tools
policy: Allow access to GetAll property method in backends and log services
tests: Migrate dbus/get-service-version-prop to Meson and GDBus++
GDBus++/ovpn3cli: Migrate 'openvpn3-admin version'
build: Move DNS configuration code from netcfg service to netcfgmgr_lib
GDBus++/ovpn3cli: Migrate 'openvpn3-admin init-config'
log/journald: Add O3_LOG_SENDER meta data for log service
log/journald: Update the journald log parser to new Events::Log location
log/journald: Extend the journald parser to include the updated log service
GDBus++/ovpn3cli: Migrate 'openvpn3-admin journal'
sessionmgr/proxy: Add Session::GetConfigName()
GDBus++/ovpn3cli: Migrate argument helper functions
GDBus++/ovpn3cli: Migrate 'openvpn3-admin log-service'
netcfg/proxy: Enforce NetCfgProxy::Manager to be a smart-pointer
log: Add additional mutex around log subscription changes
netcfg: Catch errors sending signals
netcfg/dns: Preserve device name in systemd-resolved D-Bus proxy
netcfg/dns: Retrieve values set in NetCfg::DNS::resolved::Link setters
netcfg/dns-resolved: Implement sending NetworkChange DNS added/removed signals
netcfg/dns: Provide device name when sending DNS_*_REMOVED signals
netcfg: Fix incorrect signal subscription D-Bus API
netcfg: Don't try to send NetworkChange signals without subscribers
netcfg/NetworkChange: Implement crude subscription ownership tracking
netcfg: Activate the missing NetworkChange subscription feature
netcfg/proxy: Fix typo in D-Bus data type subscription retrival
netcfg: Fix type inconsistency in NetCfgChangeType
netcfg/proxy: Use DBus::Exception::GetRawError() instead of what()
netcfg/proxy: Use synchronous call for NotificationUnsubscribe
netcfg: Base NetCfg exceptions on DBus::Exception
GDBus++/ovpn3cli: Migrate 'openvpn3-admin netcfg-service'
sessionmgr/proxy: Don't call StartServiceByName() in the constructor
build: Add workaround for tinyxml2 macro bug in OpenVPN 3 Core
sessionmgr/proxy: Implement SessionManager::Proxy::Manager::Introspect()
sessionmgr/proxy: Implement methods for a few Session object properties
GDBus++/ovpn3cli: Migrate 'openvpn3-admin sessionmgr-service'
sessionmgr: Remove superfluous check in helper_retrieve_sessions()
utils: Add a global time_t to local date/time string converter
configmgr/proxy: Extend the configmgr proxy with property getters
GDBus++/ovpn3cli: Migrate 'openvpn3 configs-list'
configmgr/proxy: Extend the configmgr proxy with CheckObjectExists()
configmgr/proxy: Add helper code for using smart-pointers
ovpn3cli/arghelpers: Add optional DBus::Connection to retrieve_config_path()
GDBus++/ovpn3cli: Migrate 'openvpn3 config-manage'
GDBus++/ovpn3cli: Migrate 'openvpn3 config-acl'
GDBus++/ovpn3cli: Migrate 'openvpn3 config-dump'
GDBus++/ovpn3cli: Migrate 'openvpn3 config-remove'
GDBus++/ovpn3cli: Migrate 'openvpn3 config-import'
configmgr/proxy: Improve error message on config object not found
sessionmgr/proxy: Add GetConfigPath() method
GDBus++/ovpn3cli: Migrate 'openvpn3 sessions-list'
GDBus++/ovpn3cli: Migrate 'openvpn3 session-stats'
sessionmgr/proxy: Add CheckSessionExists() method
GDBus++/ovpn3cli: Migrate 'openvpn3 session-acl'
client: Use StatusMinor::SESS_AUTH_URL for pending web authentications
common/cmdargparser: Add missing #include <sstream>
dbus: Improve object ownership GetUID/GetPID call error scenarios
common: Add missing #include<string> in open-uri.hpp
events: Fix typ0 in the Status method - Get/SetPrintMode
log/proxy: Harden the LogProxy::Remove() method
sessionmgr: Improve log_forwarders access across multiple threads
configmgr/proxy: Update DBus::Proxy::Exception throw APIs
sessionmgr: Session::method_ready() uses wrong exception string for parsing
sessionmgr/proxy: Use *::List where possible for handling known std::vector<> types
sessionmgr/proxy: Session::Ready() cannot use simple_call()
sessionmgr/proxy: Session::GetLastStatus() should not return a const object
GDBus++/ovpn3cli: Migrate 'openvpn3 session-auth'
sessionmgr/proxy: Base SessionManager::Proxy::Exception on DBus::Exception
ovpn3cli: retrieve_config_path() should return DBus::Object::Path
sessionmgr/proxy: Provide all details when Proxy::Session::Ready() fallback throws
configmgr/proxy: OpenVPN3ConfigurationProxy::Import() should return DBus::Object::Path
ovpn3cli/GDBus++: Migrate 'openvpn3 session-start'
ovpn3cli/session: Move statistics_plain() helper function to helpers.cpp
ovpn3cli/GDBus++: Migrate 'openvpn3 session-manage'
sessionmgr: Don't wipe the log_forwarders map until we're done
log/logwriter: Extend the API to handle Events::Status
common/utils: Add is_colour_terminal() helper function
tests/GDBus++: Migrate the logfwd-listener test program
sessionmgr/proxy: Move local exceptions to SessionManager::Proxy::Exception
ovpn3cli/GDBus++: Migrate 'openvpn3 log'
ovpn3cli: Make main() provide argv[0] details in exceptions
GDBus++: Remove left overs from the old DBus implementation
policy: Be more generous with access to Ping methods
sessionmgr/proxy: Add extra check at setup to check availability in Manager
configmgr/proxy: Replace Ping in ctor with CheckObjectExists()
ovpn3cli/log: Fix signal setup errors with fresh starts
ovpn3cli/log: LogAttach::lookup_config_name() does not always need iterations
build: Remove autoconf/automake build configuration
docs: Update README and BUILD documentation
codestyle: Do a complete reformat for consistency
docs/man: The logger service is renamed - openvpn3-service-log
docs: Update the renamed openvpn3-service-log in misc documentation
src: Update to the renamed openvpn3-service-log in the sources
docs/man: Generalize the generation and installation of man pages
build: Move finding 'cp' from dco to main meson.build
build: Install the Python code via Meson
docs: Minor style cleanup in dbus-overview.md
build: Install the distro/systemd files if systemd is enabled
build: Remove the '-dev' extension to binaries
build: Split out the openvpn3/ Python module to a separate meson.build
build: Prepare and install bash-completion files when enabled
build: Generate and install polkit and PolicyKit rules
build: Install the persistent configurations directory
build: Migrate profilemerge-optionlist test program to Meson
tests: Build config JSON import/export test programs
tests: Build open-uri-test
common: Get rid of glib-unix.h from cmdargparser.hpp
build: Reduce linking deps for test programs
build: Don't build unit-tests unless enabled
ovpn3cli: Fix failing shell-completion for 'openvpn3 log'
configmgr: Adjust ACLs for Fetch/FetchJSON and public_access rights
configmgr: Grant read access to more config object properties
configmgr: Provide better user-error when Authorize() rejects access
log: Don't duplicate Events::Log() prefix in the log writes
ovpn3cli/log: Remove duplicated Events::Log details in log output
configmgr/proxy: Add/Remove tag methods provided odd errors
ovpn3cli/config-manage: Remove not needed details in errors from --tag and --remove-tag
ovpn3cli/config-manage: Extract all profile before displaying it
configmgr/proxy: Add method to retrieve the D-Bus path of the object
ovpn3cli/config-acl: Add some air around the output and show D-Bus path
ovpn3cli/config-manage: Add D-Bus path to --show
configmgr: Fix properties via add_persistent_property() not working
code style: Use BreakBeforeBinaryOperators: NonAssignment
code style clean-up
ovpn3cli/config-manage: Better message on profile objects not found
ovpn3cli: Improve overall error extraction for the command line
ovpn3cli/log: Improve error message when LogForward() call fails
netcfg/proxy: Fix incorrect data type for Device::SetMtu()
netcfg: Implement missing device object properties
configmgr: Fix mixed up Log Attach() API usage
sessionmgr: Generalize the check if the backend VPN proxy is valid
sessionmgr: Remove the backend VPN proxy if session closing fails
sessionmgr: Catch errors if DBus::Object::Manager::RemoveObject() fails
sessionmgr: Fail Authorization() if VPN backend is dead
configmgr/proxy: Calling CheckObjectExists() should not happen in ctor
sessionmgr/proxy: Improve the SessionManager::Proxy::Manager setup
configmgr: Ensure log service is available on config import
configmgr: Improve error message to user on import errors
client: Check vpnclient object exists in 'Ready' callback
ovpn3cli/session-start: Improve stability starting sessions from file
tests: Don't run config-override-selftest if Config Manager is inaccessible
configmgr: Extend configuration objects with a Validate() D-Bus method
ovpn3cli/session-start: Validate config profiles before starting a new VPN session
python: Add config profile validation in openvpn2 and openvpn3-systemd
ovpn3cli/config: Add profile validity check in config-manage and configs-list
github: Add issue template - migration to codeberg.org
configmgr/proxy: Add feature check for Validate method
ovpn3cli/session-start: Always refresh feature set setting up configmgr proxy
netcfg/proxy: Check non-response calls for nullptr before freeing
client: Catch exceptions from NetCfgProxy::Device method calls
netcfg: Return when no DNS resolver is configured in method_add_dns_search()
Frank Lichtenheld (1):
build-selinux-policy: make sure to use bash
Razvan Cojocaru (4):
GDBus++: Migrate openvpn3-service-configmgr
build: Use version_compare(), not lexicographical comparisons
Use get_option('sbindir') instead of hardcoded 'sbin'
log/syslog: Don't assign NULL to const std::string& parameter
------------------------------------------------------------------------