[PATCH] Use pppd.h provided by ppp-dev
Christoph Biedl <[email protected]> Thu, 7 Feb 2013 00:42:48 +0100
| Newsgroups | gmane.network.poptop |
|---|---|
| Message-ID | <[email protected]> |
I'm not sure about that one, see the Debian bug report for details. Appearently at some time in the past the shipped plugins/pppd.h did not match any longer, so the one provided by the ppp-dev package is used instead. Does this make sense in upstream, too? Description: Use pppd.h provided by ppp-dev Author: Stu Teasdale <[email protected]> Author: Christoph Biedl <[email protected]> Bug-Debian: http://bugs.debian.org/369714 --- a/plugins/pptpd-logwtmp.c +++ b/plugins/pptpd-logwtmp.c @@ -12,7 +12,7 @@ #include <unistd.h> #include <utmp.h> #include <string.h> -#include "pppd.h" +#include <pppd/pppd.h> char pppd_version[] = VERSION; --- a/plugins/pppd.h +++ /dev/null @@ -1,882 +0,0 @@ -/* - * pppd.h - PPP daemon global declarations. - * - * Copyright (c) 1984-2000 Carnegie Mellon University. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * - * 3. The name "Carnegie Mellon University" must not be used to - * endorse or promote products derived from this software without - * prior written permission. For permission or any legal - * details, please contact - * Office of Technology Transfer - * Carnegie Mellon University - * 5000 Forbes Avenue - * Pittsburgh, PA 15213-3890 - * (412) 268-4387, fax: (412) 268-7395 - * [email protected] - * - * 4. Redistributions of any form whatsoever must retain the following - * acknowledgment: - * "This product includes software developed by Computing Services - * at Carnegie Mellon University (http://www.cmu.edu/computing/)." - * - * CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO - * THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY - * AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE - * FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN - * AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING - * OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - * upstream pppd.h,v 1.82 2003/04/07 00:01:46 paulus Exp - * $Id: pppd.h,v 1.1 2004/04/28 11:36:07 quozl Exp $ - */ - -/* - * TODO: - */ - -#ifndef __PPPD_H__ -#define __PPPD_H__ - -#include <stdio.h> /* for FILE */ -#include <limits.h> /* for NGROUPS_MAX */ -#include <sys/param.h> /* for MAXPATHLEN and BSD4_4, if defined */ -#include <sys/types.h> /* for u_int32_t, if defined */ -#include <sys/time.h> /* for struct timeval */ -#include <net/ppp_defs.h> -#include "patchlevel.h" - -#if defined(__STDC__) -#include <stdarg.h> -#define __V(x) x -#else -#include <varargs.h> -#define __V(x) (va_alist) va_dcl -#define const -#define volatile -#endif - -#ifdef INET6 -#include "eui64.h" -#endif - -/* - * Limits. - */ - -#define NUM_PPP 1 /* One PPP interface supported (per process) */ -#define MAXWORDLEN 1024 /* max length of word in file (incl null) */ -#define MAXARGS 1 /* max # args to a command */ -#define MAXNAMELEN 256 /* max length of hostname or name for auth */ -#define MAXSECRETLEN 256 /* max length of password or secret */ - -/* - * Option descriptor structure. - */ - -typedef unsigned char bool; - -enum opt_type { - o_special_noarg = 0, - o_special = 1, - o_bool, - o_int, - o_uint32, - o_string, - o_wild -}; - -typedef struct { - char *name; /* name of the option */ - enum opt_type type; - void *addr; - char *description; - unsigned int flags; - void *addr2; - int upper_limit; - int lower_limit; - const char *source; - short int priority; - short int winner; -} option_t; - -/* Values for flags */ -#define OPT_VALUE 0xff /* mask for presupplied value */ -#define OPT_HEX 0x100 /* int option is in hex */ -#define OPT_NOARG 0x200 /* option doesn't take argument */ -#define OPT_OR 0x400 /* OR in argument to value */ -#define OPT_INC 0x800 /* increment value */ -#define OPT_A2OR 0x800 /* for o_bool, OR arg to *(u_char *)addr2 */ -#define OPT_PRIV 0x1000 /* privileged option */ -#define OPT_STATIC 0x2000 /* string option goes into static array */ -#define OPT_LLIMIT 0x4000 /* check value against lower limit */ -#define OPT_ULIMIT 0x8000 /* check value against upper limit */ -#define OPT_LIMITS (OPT_LLIMIT|OPT_ULIMIT) -#define OPT_ZEROOK 0x10000 /* 0 value is OK even if not within limits */ -#define OPT_HIDE 0x10000 /* for o_string, print value as ?????? */ -#define OPT_A2LIST 0x10000 /* for o_special, keep list of values */ -#define OPT_A2CLRB 0x10000 /* o_bool, clr val bits in *(u_char *)addr2 */ -#define OPT_NOINCR 0x20000 /* value mustn't be increased */ -#define OPT_ZEROINF 0x40000 /* with OPT_NOINCR, 0 == infinity */ -#define OPT_PRIO 0x80000 /* process option priorities for this option */ -#define OPT_PRIOSUB 0x100000 /* subsidiary member of priority group */ -#define OPT_ALIAS 0x200000 /* option is alias for previous option */ -#define OPT_A2COPY 0x400000 /* addr2 -> second location to rcv value */ -#define OPT_ENABLE 0x800000 /* use *addr2 as enable for option */ -#define OPT_A2CLR 0x1000000 /* clear *(bool *)addr2 */ -#define OPT_PRIVFIX 0x2000000 /* user can't override if set by root */ -#define OPT_INITONLY 0x4000000 /* option can only be set in init phase */ -#define OPT_DEVEQUIV 0x8000000 /* equiv to device name */ -#define OPT_DEVNAM (OPT_INITONLY | OPT_DEVEQUIV) -#define OPT_A2PRINTER 0x10000000 /* *addr2 is a fn for printing option */ -#define OPT_A2STRVAL 0x20000000 /* *addr2 points to current string value */ -#define OPT_NOPRINT 0x40000000 /* don't print this option at all */ - -#define OPT_VAL(x) ((x) & OPT_VALUE) - -/* Values for priority */ -#define OPRIO_DEFAULT 0 /* a default value */ -#define OPRIO_CFGFILE 1 /* value from a configuration file */ -#define OPRIO_CMDLINE 2 /* value from the command line */ -#define OPRIO_SECFILE 3 /* value from options in a secrets file */ -#define OPRIO_ROOT 100 /* added to priority if OPT_PRIVFIX && root */ - -#ifndef GIDSET_TYPE -#define GIDSET_TYPE gid_t -#endif - -/* Structure representing a list of permitted IP addresses. */ -struct permitted_ip { - int permit; /* 1 = permit, 0 = forbid */ - u_int32_t base; /* match if (addr & mask) == base */ - u_int32_t mask; /* base and mask are in network byte order */ -}; - -/* - * Unfortunately, the linux kernel driver uses a different structure - * for statistics from the rest of the ports. - * This structure serves as a common representation for the bits - * pppd needs. - */ -struct pppd_stats { - unsigned int bytes_in; - unsigned int bytes_out; - unsigned int pkts_in; - unsigned int pkts_out; -}; - -/* Used for storing a sequence of words. Usually malloced. */ -struct wordlist { - struct wordlist *next; - char *word; -}; - -/* An endpoint discriminator, used with multilink. */ -#define MAX_ENDP_LEN 20 /* maximum length of discriminator value */ -struct epdisc { - unsigned char class; - unsigned char length; - unsigned char value[MAX_ENDP_LEN]; -}; - -/* values for epdisc.class */ -#define EPD_NULL 0 /* null discriminator, no data */ -#define EPD_LOCAL 1 -#define EPD_IP 2 -#define EPD_MAC 3 -#define EPD_MAGIC 4 -#define EPD_PHONENUM 5 - -typedef void (*notify_func) __P((void *, int)); - -struct notifier { - struct notifier *next; - notify_func func; - void *arg; -}; - -/* - * Global variables. - */ - -extern int hungup; /* Physical layer has disconnected */ -extern int ifunit; /* Interface unit number */ -extern char ifname[]; /* Interface name */ -extern char hostname[]; /* Our hostname */ -extern u_char outpacket_buf[]; /* Buffer for outgoing packets */ -extern int phase; /* Current state of link - see values below */ -extern int baud_rate; /* Current link speed in bits/sec */ -extern char *progname; /* Name of this program */ -extern int redirect_stderr;/* Connector's stderr should go to file */ -extern char peer_authname[];/* Authenticated name of peer */ -extern int auth_done[NUM_PPP]; /* Methods actually used for auth */ -extern int privileged; /* We were run by real-uid root */ -extern int need_holdoff; /* Need holdoff period after link terminates */ -extern char **script_env; /* Environment variables for scripts */ -extern int detached; /* Have detached from controlling tty */ -extern GIDSET_TYPE groups[NGROUPS_MAX]; /* groups the user is in */ -extern int ngroups; /* How many groups valid in groups */ -extern struct pppd_stats link_stats; /* byte/packet counts etc. for link */ -extern int link_stats_valid; /* set if link_stats is valid */ -extern unsigned link_connect_time; /* time the link was up for */ -extern int using_pty; /* using pty as device (notty or pty opt.) */ -extern int log_to_fd; /* logging to this fd as well as syslog */ -extern bool log_default; /* log_to_fd is default (stdout) */ -extern char *no_ppp_msg; /* message to print if ppp not in kernel */ -extern volatile int status; /* exit status for pppd */ -extern bool devnam_fixed; /* can no longer change devnam */ -extern int unsuccess; /* # unsuccessful connection attempts */ -extern int do_callback; /* set if we want to do callback next */ -extern int doing_callback; /* set if this is a callback */ -extern int error_count; /* # of times error() has been called */ -extern char ppp_devnam[MAXPATHLEN]; -extern char remote_number[MAXNAMELEN]; /* Remote telephone number, if avail. */ -extern int ppp_session_number; /* Session number (eg PPPoE session) */ - -extern int listen_time; /* time to listen first (ms) */ -extern struct notifier *pidchange; /* for notifications of pid changing */ -extern struct notifier *phasechange; /* for notifications of phase changes */ -extern struct notifier *exitnotify; /* for notification that we're exiting */ -extern struct notifier *sigreceived; /* notification of received signal */ -extern struct notifier *ip_up_notifier; /* IPCP has come up */ -extern struct notifier *ip_down_notifier; /* IPCP has gone down */ -extern struct notifier *auth_up_notifier; /* peer has authenticated */ -extern struct notifier *link_down_notifier; /* link has gone down */ -extern struct notifier *fork_notifier; /* we are a new child process */ - -/* Values for do_callback and doing_callback */ -#define CALLBACK_DIALIN 1 /* we are expecting the call back */ -#define CALLBACK_DIALOUT 2 /* we are dialling out to call back */ - -/* - * Variables set by command-line options. - */ - -extern int debug; /* Debug flag */ -extern int kdebugflag; /* Tell kernel to print debug messages */ -extern int default_device; /* Using /dev/tty or equivalent */ -extern char devnam[MAXPATHLEN]; /* Device name */ -extern int crtscts; /* Use hardware flow control */ -extern bool modem; /* Use modem control lines */ -extern int inspeed; /* Input/Output speed requested */ -extern u_int32_t netmask; /* IP netmask to set on interface */ -extern bool lockflag; /* Create lock file to lock the serial dev */ -extern bool nodetach; /* Don't detach from controlling tty */ -extern bool updetach; /* Detach from controlling tty when link up */ -extern char *initializer; /* Script to initialize physical link */ -extern char *connect_script; /* Script to establish physical link */ -extern char *disconnect_script; /* Script to disestablish physical link */ -extern char *welcomer; /* Script to welcome client after connection */ -extern char *ptycommand; /* Command to run on other side of pty */ -extern int maxconnect; /* Maximum connect time (seconds) */ -extern char user[MAXNAMELEN];/* Our name for authenticating ourselves */ -extern char passwd[MAXSECRETLEN]; /* Password for PAP or CHAP */ -extern bool auth_required; /* Peer is required to authenticate */ -extern bool persist; /* Reopen link after it goes down */ -extern bool uselogin; /* Use /etc/passwd for checking PAP */ -extern char our_name[MAXNAMELEN];/* Our name for authentication purposes */ -extern char remote_name[MAXNAMELEN]; /* Peer's name for authentication */ -extern bool explicit_remote;/* remote_name specified with remotename opt */ -extern bool demand; /* Do dial-on-demand */ -extern char *ipparam; /* Extra parameter for ip up/down scripts */ -extern bool cryptpap; /* Others' PAP passwords are encrypted */ -extern int idle_time_limit;/* Shut down link if idle for this long */ -extern int holdoff; /* Dead time before restarting */ -extern bool holdoff_specified; /* true if user gave a holdoff value */ -extern bool notty; /* Stdin/out is not a tty */ -extern char *pty_socket; /* Socket to connect to pty */ -extern char *record_file; /* File to record chars sent/received */ -extern bool sync_serial; /* Device is synchronous serial device */ -extern int maxfail; /* Max # of unsuccessful connection attempts */ -extern char linkname[MAXPATHLEN]; /* logical name for link */ -extern bool tune_kernel; /* May alter kernel settings as necessary */ -extern int connect_delay; /* Time to delay after connect script */ -extern int max_data_rate; /* max bytes/sec through charshunt */ -extern int req_unit; /* interface unit number to use */ -extern bool multilink; /* enable multilink operation */ -extern bool noendpoint; /* don't send or accept endpt. discrim. */ -extern char *bundle_name; /* bundle name for multilink */ -extern bool dump_options; /* print out option values */ -extern bool dryrun; /* check everything, print options, exit */ - -#ifdef MAXOCTETS -extern unsigned int maxoctets; /* Maximum octetes per session (in bytes) */ -extern int maxoctets_dir; /* Direction : - 0 - in+out (default) - 1 - in - 2 - out - 3 - max(in,out) */ -extern int maxoctets_timeout; /* Timeout for check of octets limit */ -#define PPP_OCTETS_DIRECTION_SUM 0 -#define PPP_OCTETS_DIRECTION_IN 1 -#define PPP_OCTETS_DIRECTION_OUT 2 -#define PPP_OCTETS_DIRECTION_MAXOVERAL 3 -/* same as previos, but little different on RADIUS side */ -#define PPP_OCTETS_DIRECTION_MAXSESSION 4 -#endif - -#ifdef PPP_FILTER -extern struct bpf_program pass_filter; /* Filter for pkts to pass */ -extern struct bpf_program active_filter; /* Filter for link-active pkts */ -#endif - -#ifdef MSLANMAN -extern bool ms_lanman; /* Use LanMan password instead of NT */ - /* Has meaning only with MS-CHAP challenges */ -#endif - -/* Values for auth_pending, auth_done */ -#define PAP_WITHPEER 0x1 -#define PAP_PEER 0x2 -#define CHAP_WITHPEER 0x4 -#define CHAP_PEER 0x8 -#define EAP_WITHPEER 0x10 -#define EAP_PEER 0x20 - -/* Values for auth_done only */ -#define CHAP_MD5_WITHPEER 0x40 -#define CHAP_MD5_PEER 0x80 -#ifdef CHAPMS -#define CHAP_MS_SHIFT 8 /* LSB position for MS auths */ -#define CHAP_MS_WITHPEER 0x100 -#define CHAP_MS_PEER 0x200 -#define CHAP_MS2_WITHPEER 0x400 -#define CHAP_MS2_PEER 0x800 -#endif - -extern char *current_option; /* the name of the option being parsed */ -extern int privileged_option; /* set iff the current option came from root */ -extern char *option_source; /* string saying where the option came from */ -extern int option_priority; /* priority of current options */ - -/* - * Values for phase. - */ -#define PHASE_DEAD 0 -#define PHASE_INITIALIZE 1 -#define PHASE_SERIALCONN 2 -#define PHASE_DORMANT 3 -#define PHASE_ESTABLISH 4 -#define PHASE_AUTHENTICATE 5 -#define PHASE_CALLBACK 6 -#define PHASE_NETWORK 7 -#define PHASE_RUNNING 8 -#define PHASE_TERMINATE 9 -#define PHASE_DISCONNECT 10 -#define PHASE_HOLDOFF 11 - -/* - * The following struct gives the addresses of procedures to call - * for a particular protocol. - */ -struct protent { - u_short protocol; /* PPP protocol number */ - /* Initialization procedure */ - void (*init) __P((int unit)); - /* Process a received packet */ - void (*input) __P((int unit, u_char *pkt, int len)); - /* Process a received protocol-reject */ - void (*protrej) __P((int unit)); - /* Lower layer has come up */ - void (*lowerup) __P((int unit)); - /* Lower layer has gone down */ - void (*lowerdown) __P((int unit)); - /* Open the protocol */ - void (*open) __P((int unit)); - /* Close the protocol */ - void (*close) __P((int unit, char *reason)); - /* Print a packet in readable form */ - int (*printpkt) __P((u_char *pkt, int len, - void (*printer) __P((void *, char *, ...)), - void *arg)); - /* Process a received data packet */ - void (*datainput) __P((int unit, u_char *pkt, int len)); - bool enabled_flag; /* 0 iff protocol is disabled */ - char *name; /* Text name of protocol */ - char *data_name; /* Text name of corresponding data protocol */ - option_t *options; /* List of command-line options */ - /* Check requested options, assign defaults */ - void (*check_options) __P((void)); - /* Configure interface for demand-dial */ - int (*demand_conf) __P((int unit)); - /* Say whether to bring up link for this pkt */ - int (*active_pkt) __P((u_char *pkt, int len)); -}; - -/* Table of pointers to supported protocols */ -extern struct protent *protocols[]; - -/* - * This struct contains pointers to a set of procedures for - * doing operations on a "channel". A channel provides a way - * to send and receive PPP packets - the canonical example is - * a serial port device in PPP line discipline (or equivalently - * with PPP STREAMS modules pushed onto it). - */ -struct channel { - /* set of options for this channel */ - option_t *options; - /* find and process a per-channel options file */ - void (*process_extra_options) __P((void)); - /* check all the options that have been given */ - void (*check_options) __P((void)); - /* get the channel ready to do PPP, return a file descriptor */ - int (*connect) __P((void)); - /* we're finished with the channel */ - void (*disconnect) __P((void)); - /* put the channel into PPP `mode' */ - int (*establish_ppp) __P((int)); - /* take the channel out of PPP `mode', restore loopback if demand */ - void (*disestablish_ppp) __P((int)); - /* set the transmit-side PPP parameters of the channel */ - void (*send_config) __P((int, u_int32_t, int, int)); - /* set the receive-side PPP parameters of the channel */ - void (*recv_config) __P((int, u_int32_t, int, int)); - /* cleanup on error or normal exit */ - void (*cleanup) __P((void)); - /* close the device, called in children after fork */ - void (*close) __P((void)); -}; - -extern struct channel *the_channel; - -/* - * Prototypes. - */ - -/* Procedures exported from main.c. */ -void set_ifunit __P((int)); /* set stuff that depends on ifunit */ -void detach __P((void)); /* Detach from controlling tty */ -void die __P((int)); /* Cleanup and exit */ -void quit __P((void)); /* like die(1) */ -void novm __P((char *)); /* Say we ran out of memory, and die */ -void timeout __P((void (*func)(void *), void *arg, int s, int us)); - /* Call func(arg) after s.us seconds */ -void untimeout __P((void (*func)(void *), void *arg)); - /* Cancel call to func(arg) */ -void record_child __P((int, char *, void (*) (void *), void *)); -pid_t safe_fork __P((void)); /* Fork & close stuff in child */ -int device_script __P((char *cmd, int in, int out, int dont_wait)); - /* Run `cmd' with given stdin and stdout */ -pid_t run_program __P((char *prog, char **args, int must_exist, - void (*done)(void *), void *arg)); - /* Run program prog with args in child */ -void reopen_log __P((void)); /* (re)open the connection to syslog */ -void update_link_stats __P((int)); /* Get stats at link termination */ -void script_setenv __P((char *, char *, int)); /* set script env var */ -void script_unsetenv __P((char *)); /* unset script env var */ -void new_phase __P((int)); /* signal start of new phase */ -void add_notifier __P((struct notifier **, notify_func, void *)); -void remove_notifier __P((struct notifier **, notify_func, void *)); -void notify __P((struct notifier *, int)); -int ppp_send_config __P((int, int, u_int32_t, int, int)); -int ppp_recv_config __P((int, int, u_int32_t, int, int)); - -/* Procedures exported from tty.c. */ -void tty_init __P((void)); - -/* Procedures exported from utils.c. */ -void log_packet __P((u_char *, int, char *, int)); - /* Format a packet and log it with syslog */ -void print_string __P((char *, int, void (*) (void *, char *, ...), - void *)); /* Format a string for output */ -int slprintf __P((char *, int, char *, ...)); /* sprintf++ */ -int vslprintf __P((char *, int, char *, va_list)); /* vsprintf++ */ -size_t strlcpy __P((char *, const char *, size_t)); /* safe strcpy */ -size_t strlcat __P((char *, const char *, size_t)); /* safe strncpy */ -void dbglog __P((char *, ...)); /* log a debug message */ -void info __P((char *, ...)); /* log an informational message */ -void notice __P((char *, ...)); /* log a notice-level message */ -void warn __P((char *, ...)); /* log a warning message */ -void error __P((char *, ...)); /* log an error message */ -void fatal __P((char *, ...)); /* log an error message and die(1) */ -void init_pr_log __P((char *, int)); /* initialize for using pr_log */ -void pr_log __P((void *, char *, ...)); /* printer fn, output to syslog */ -void end_pr_log __P((void)); /* finish up after using pr_log */ -void dump_packet __P((const char *, u_char *, int)); - /* dump packet to debug log if interesting */ -ssize_t complete_read __P((int, void *, size_t)); - /* read a complete buffer */ - -/* Procedures exported from auth.c */ -void link_required __P((int)); /* we are starting to use the link */ -void link_terminated __P((int)); /* we are finished with the link */ -void link_down __P((int)); /* the LCP layer has left the Opened state */ -void link_established __P((int)); /* the link is up; authenticate now */ -void start_networks __P((int)); /* start all the network control protos */ -void continue_networks __P((int)); /* start network [ip, etc] control protos */ -void np_up __P((int, int)); /* a network protocol has come up */ -void np_down __P((int, int)); /* a network protocol has gone down */ -void np_finished __P((int, int)); /* a network protocol no longer needs link */ -void auth_peer_fail __P((int, int)); - /* peer failed to authenticate itself */ -void auth_peer_success __P((int, int, int, char *, int)); - /* peer successfully authenticated itself */ -void auth_withpeer_fail __P((int, int)); - /* we failed to authenticate ourselves */ -void auth_withpeer_success __P((int, int, int)); - /* we successfully authenticated ourselves */ -void auth_check_options __P((void)); - /* check authentication options supplied */ -void auth_reset __P((int)); /* check what secrets we have */ -int check_passwd __P((int, char *, int, char *, int, char **)); - /* Check peer-supplied username/password */ -int get_secret __P((int, char *, char *, char *, int *, int)); - /* get "secret" for chap */ -int get_srp_secret __P((int unit, char *client, char *server, char *secret, - int am_server)); -int auth_ip_addr __P((int, u_int32_t)); - /* check if IP address is authorized */ -int auth_number __P((void)); /* check if remote number is authorized */ -int bad_ip_adrs __P((u_int32_t)); - /* check if IP address is unreasonable */ - -/* Procedures exported from demand.c */ -void demand_conf __P((void)); /* config interface(s) for demand-dial */ -void demand_block __P((void)); /* set all NPs to queue up packets */ -void demand_unblock __P((void)); /* set all NPs to pass packets */ -void demand_discard __P((void)); /* set all NPs to discard packets */ -void demand_rexmit __P((int)); /* retransmit saved frames for an NP */ -int loop_chars __P((unsigned char *, int)); /* process chars from loopback */ -int loop_frame __P((unsigned char *, int)); /* should we bring link up? */ - -/* Procedures exported from multilink.c */ -void mp_check_options __P((void)); /* Check multilink-related options */ -int mp_join_bundle __P((void)); /* join our link to an appropriate bundle */ -char *epdisc_to_str __P((struct epdisc *)); /* string from endpoint discrim. */ -int str_to_epdisc __P((struct epdisc *, char *)); /* endpt disc. from str */ - -/* Procedures exported from sys-*.c */ -void sys_init __P((void)); /* Do system-dependent initialization */ -void sys_cleanup __P((void)); /* Restore system state before exiting */ -int sys_check_options __P((void)); /* Check options specified */ -void sys_close __P((void)); /* Clean up in a child before execing */ -int ppp_available __P((void)); /* Test whether ppp kernel support exists */ -int get_pty __P((int *, int *, char *, int)); /* Get pty master/slave */ -int open_ppp_loopback __P((void)); /* Open loopback for demand-dialling */ -int tty_establish_ppp __P((int)); /* Turn serial port into a ppp interface */ -void tty_disestablish_ppp __P((int)); /* Restore port to normal operation */ -void generic_disestablish_ppp __P((int dev_fd)); /* Restore device setting */ -int generic_establish_ppp __P((int dev_fd)); /* Make a ppp interface */ -void make_new_bundle __P((int, int, int, int)); /* Create new bundle */ -int bundle_attach __P((int)); /* Attach link to existing bundle */ -void cfg_bundle __P((int, int, int, int)); /* Configure existing bundle */ -void clean_check __P((void)); /* Check if line was 8-bit clean */ -void set_up_tty __P((int, int)); /* Set up port's speed, parameters, etc. */ -void restore_tty __P((int)); /* Restore port's original parameters */ -void setdtr __P((int, int)); /* Raise or lower port's DTR line */ -void output __P((int, u_char *, int)); /* Output a PPP packet */ -void wait_input __P((struct timeval *)); - /* Wait for input, with timeout */ -void add_fd __P((int)); /* Add fd to set to wait for */ -void remove_fd __P((int)); /* Remove fd from set to wait for */ -int read_packet __P((u_char *)); /* Read PPP packet */ -int get_loop_output __P((void)); /* Read pkts from loopback */ -void tty_send_config __P((int, u_int32_t, int, int)); - /* Configure i/f transmit parameters */ -void tty_set_xaccm __P((ext_accm)); - /* Set extended transmit ACCM */ -void tty_recv_config __P((int, u_int32_t, int, int)); - /* Configure i/f receive parameters */ -int ccp_test __P((int, u_char *, int, int)); - /* Test support for compression scheme */ -void ccp_flags_set __P((int, int, int)); - /* Set kernel CCP state */ -int ccp_fatal_error __P((int)); /* Test for fatal decomp error in kernel */ -int get_idle_time __P((int, struct ppp_idle *)); - /* Find out how long link has been idle */ -int get_ppp_stats __P((int, struct pppd_stats *)); - /* Return link statistics */ -void netif_set_mtu __P((int, int)); /* Set PPP interface MTU */ -int netif_get_mtu __P((int)); /* Get PPP interface MTU */ -int sifvjcomp __P((int, int, int, int)); - /* Configure VJ TCP header compression */ -int sifup __P((int)); /* Configure i/f up for one protocol */ -int sifnpmode __P((int u, int proto, enum NPmode mode)); - /* Set mode for handling packets for proto */ -int sifdown __P((int)); /* Configure i/f down for one protocol */ -int sifaddr __P((int, u_int32_t, u_int32_t, u_int32_t)); - /* Configure IPv4 addresses for i/f */ -int cifaddr __P((int, u_int32_t, u_int32_t)); - /* Reset i/f IP addresses */ -#ifdef INET6 -int sif6addr __P((int, eui64_t, eui64_t)); - /* Configure IPv6 addresses for i/f */ -int cif6addr __P((int, eui64_t, eui64_t)); - /* Remove an IPv6 address from i/f */ -#endif -int sifdefaultroute __P((int, u_int32_t, u_int32_t)); - /* Create default route through i/f */ -int cifdefaultroute __P((int, u_int32_t, u_int32_t)); - /* Delete default route through i/f */ -int sifproxyarp __P((int, u_int32_t)); - /* Add proxy ARP entry for peer */ -int cifproxyarp __P((int, u_int32_t)); - /* Delete proxy ARP entry for peer */ -u_int32_t GetMask __P((u_int32_t)); /* Get appropriate netmask for address */ -int lock __P((char *)); /* Create lock file for device */ -int relock __P((int)); /* Rewrite lock file with new pid */ -void unlock __P((void)); /* Delete previously-created lock file */ -void logwtmp __P((const char *, const char *, const char *)); - /* Write entry to wtmp file */ -int get_host_seed __P((void)); /* Get host-dependent random number seed */ -int have_route_to __P((u_int32_t)); /* Check if route to addr exists */ -#ifdef PPP_FILTER -int set_filters __P((struct bpf_program *pass, struct bpf_program *active)); - /* Set filter programs in kernel */ -#endif -#ifdef IPX_CHANGE -int sipxfaddr __P((int, unsigned long, unsigned char *)); -int cipxfaddr __P((int)); -#endif -int get_if_hwaddr __P((u_char *addr, char *name)); -char *get_first_ethernet __P((void)); - -/* Procedures exported from options.c */ -int setipaddr __P((char *, char **, int)); /* Set local/remote ip addresses */ -int parse_args __P((int argc, char **argv)); - /* Parse options from arguments given */ -int options_from_file __P((char *filename, int must_exist, int check_prot, - int privileged)); - /* Parse options from an options file */ -int options_from_user __P((void)); /* Parse options from user's .ppprc */ -int options_for_tty __P((void)); /* Parse options from /etc/ppp/options.tty */ -int options_from_list __P((struct wordlist *, int privileged)); - /* Parse options from a wordlist */ -int getword __P((FILE *f, char *word, int *newlinep, char *filename)); - /* Read a word from a file */ -void option_error __P((char *fmt, ...)); - /* Print an error message about an option */ -int int_option __P((char *, int *)); - /* Simplified number_option for decimal ints */ -void add_options __P((option_t *)); /* Add extra options */ -void check_options __P((void)); /* check values after all options parsed */ -int override_value __P((const char *, int, const char *)); - /* override value if permitted by priority */ -void print_options __P((void (*) __P((void *, char *, ...)), void *)); - /* print out values of all options */ - -int parse_dotted_ip __P((char *, u_int32_t *)); - -/* - * Hooks to enable plugins to change various things. - */ -extern int (*new_phase_hook) __P((int)); -extern int (*idle_time_hook) __P((struct ppp_idle *)); -extern int (*holdoff_hook) __P((void)); -extern int (*pap_check_hook) __P((void)); -extern int (*pap_auth_hook) __P((char *user, char *passwd, char **msgp, - struct wordlist **paddrs, - struct wordlist **popts)); -extern void (*pap_logout_hook) __P((void)); -extern int (*pap_passwd_hook) __P((char *user, char *passwd)); -extern int (*allowed_address_hook) __P((u_int32_t addr)); -extern void (*ip_up_hook) __P((void)); -extern void (*ip_down_hook) __P((void)); -extern void (*ip_choose_hook) __P((u_int32_t *)); - -extern int (*chap_check_hook) __P((void)); -extern int (*chap_passwd_hook) __P((char *user, char *passwd)); - -/* Let a plugin snoop sent and received packets. Useful for L2TP */ -extern void (*snoop_recv_hook) __P((unsigned char *p, int len)); -extern void (*snoop_send_hook) __P((unsigned char *p, int len)); - -/* - * Inline versions of get/put char/short/long. - * Pointer is advanced; we assume that both arguments - * are lvalues and will already be in registers. - * cp MUST be u_char *. - */ -#define GETCHAR(c, cp) { \ - (c) = *(cp)++; \ -} -#define PUTCHAR(c, cp) { \ - *(cp)++ = (u_char) (c); \ -} - - -#define GETSHORT(s, cp) { \ - (s) = *(cp)++ << 8; \ - (s) |= *(cp)++; \ -} -#define PUTSHORT(s, cp) { \ - *(cp)++ = (u_char) ((s) >> 8); \ - *(cp)++ = (u_char) (s); \ -} - -#define GETLONG(l, cp) { \ - (l) = *(cp)++ << 8; \ - (l) |= *(cp)++; (l) <<= 8; \ - (l) |= *(cp)++; (l) <<= 8; \ - (l) |= *(cp)++; \ -} -#define PUTLONG(l, cp) { \ - *(cp)++ = (u_char) ((l) >> 24); \ - *(cp)++ = (u_char) ((l) >> 16); \ - *(cp)++ = (u_char) ((l) >> 8); \ - *(cp)++ = (u_char) (l); \ -} - -#define INCPTR(n, cp) ((cp) += (n)) -#define DECPTR(n, cp) ((cp) -= (n)) - -/* - * System dependent definitions for user-level 4.3BSD UNIX implementation. - */ - -#define TIMEOUT(r, f, t) timeout((r), (f), (t), 0) -#define UNTIMEOUT(r, f) untimeout((r), (f)) - -#define BCOPY(s, d, l) memcpy(d, s, l) -#define BZERO(s, n) memset(s, 0, n) -#define BCMP(s1, s2, l) memcmp(s1, s2, l) - -#define PRINTMSG(m, l) { info("Remote message: %0.*v", l, m); } - -/* - * MAKEHEADER - Add Header fields to a packet. - */ -#define MAKEHEADER(p, t) { \ - PUTCHAR(PPP_ALLSTATIONS, p); \ - PUTCHAR(PPP_UI, p); \ - PUTSHORT(t, p); } - -/* - * Exit status values. - */ -#define EXIT_OK 0 -#define EXIT_FATAL_ERROR 1 -#define EXIT_OPTION_ERROR 2 -#define EXIT_NOT_ROOT 3 -#define EXIT_NO_KERNEL_SUPPORT 4 -#define EXIT_USER_REQUEST 5 -#define EXIT_LOCK_FAILED 6 -#define EXIT_OPEN_FAILED 7 -#define EXIT_CONNECT_FAILED 8 -#define EXIT_PTYCMD_FAILED 9 -#define EXIT_NEGOTIATION_FAILED 10 -#define EXIT_PEER_AUTH_FAILED 11 -#define EXIT_IDLE_TIMEOUT 12 -#define EXIT_CONNECT_TIME 13 -#define EXIT_CALLBACK 14 -#define EXIT_PEER_DEAD 15 -#define EXIT_HANGUP 16 -#define EXIT_LOOPBACK 17 -#define EXIT_INIT_FAILED 18 -#define EXIT_AUTH_TOPEER_FAILED 19 -#ifdef MAXOCTETS -#define EXIT_TRAFFIC_LIMIT 20 -#endif -#define EXIT_CNID_AUTH_FAILED 21 - -/* - * Debug macros. Slightly useful for finding bugs in pppd, not particularly - * useful for finding out why your connection isn't being established. - */ -#ifdef DEBUGALL -#define DEBUGMAIN 1 -#define DEBUGFSM 1 -#define DEBUGLCP 1 -#define DEBUGIPCP 1 -#define DEBUGIPV6CP 1 -#define DEBUGUPAP 1 -#define DEBUGCHAP 1 -#endif - -#ifndef LOG_PPP /* we use LOG_LOCAL2 for syslog by default */ -#if defined(DEBUGMAIN) || defined(DEBUGFSM) || defined(DEBUGSYS) \ - || defined(DEBUGLCP) || defined(DEBUGIPCP) || defined(DEBUGUPAP) \ - || defined(DEBUGCHAP) || defined(DEBUG) || defined(DEBUGIPV6CP) -#define LOG_PPP LOG_LOCAL2 -#else -#define LOG_PPP LOG_DAEMON -#endif -#endif /* LOG_PPP */ - -#ifdef DEBUGMAIN -#define MAINDEBUG(x) if (debug) dbglog x -#else -#define MAINDEBUG(x) -#endif - -#ifdef DEBUGSYS -#define SYSDEBUG(x) if (debug) dbglog x -#else -#define SYSDEBUG(x) -#endif - -#ifdef DEBUGFSM -#define FSMDEBUG(x) if (debug) dbglog x -#else -#define FSMDEBUG(x) -#endif - -#ifdef DEBUGLCP -#define LCPDEBUG(x) if (debug) dbglog x -#else -#define LCPDEBUG(x) -#endif - -#ifdef DEBUGIPCP -#define IPCPDEBUG(x) if (debug) dbglog x -#else -#define IPCPDEBUG(x) -#endif - -#ifdef DEBUGIPV6CP -#define IPV6CPDEBUG(x) if (debug) dbglog x -#else -#define IPV6CPDEBUG(x) -#endif - -#ifdef DEBUGUPAP -#define UPAPDEBUG(x) if (debug) dbglog x -#else -#define UPAPDEBUG(x) -#endif - -#ifdef DEBUGCHAP -#define CHAPDEBUG(x) if (debug) dbglog x -#else -#define CHAPDEBUG(x) -#endif - -#ifdef DEBUGIPXCP -#define IPXCPDEBUG(x) if (debug) dbglog x -#else -#define IPXCPDEBUG(x) -#endif - -#ifndef SIGTYPE -#if defined(sun) || defined(SYSV) || defined(POSIX_SOURCE) -#define SIGTYPE void -#else -#define SIGTYPE int -#endif /* defined(sun) || defined(SYSV) || defined(POSIX_SOURCE) */ -#endif /* SIGTYPE */ - -#ifndef MIN -#define MIN(a, b) ((a) < (b)? (a): (b)) -#endif -#ifndef MAX -#define MAX(a, b) ((a) > (b)? (a): (b)) -#endif - -#ifndef offsetof -#define offsetof(type, member) ((size_t) &((type *)0)->member) -#endif - -#endif /* __PPP_H__ */ ------------------------------------------------------------------------------ Free Next-Gen Firewall Hardware Offer Buy your Sophos next-gen firewall before the end March 2013 and get the hardware for free! Learn more. http://p.sf.net/sfu/sophos-d2d-feb