Re: pure-uploadscript problem

 	Did you see my email yesterday with the same problem?  I don't 
really have a solution other than changing the uid and gid to something 
else, but it worked for me.


On Thu, 15 Dec 2005, Aaron Barrus wrote:
> Hi all,
>
> my server is behaving exactly this way.  I'm running 1.0.20.  My configure looks like:
>
> ./configure --with-puredb --with-throttling --with-uploadscript --with-boring --without-banner --with-uploadscript
>
> the upload script just never seems to *run*.  I'm calling pure-uploadscript like:
>
> /usr/local/sbin/pure-uploadscript -u 0 -g 0 -r /uploadscript/pure-uploadscript.sh
>
> All my pure-uploadscript.sh contains is:
>
> echo $1 > /uploadscript/pure_uploadscript.log
>
> permissions on the pure-uploadscript.sh are 777, and the permissions for the parent directory /uploadscript are also 777.  I can't think of anything that would keep it from running.  It's running a file that anybody could run, and echoing to a log with permission for anybody to write to.
>
> Running strace on pure-uploadscript results in the same outcome as Pedro's below.
>
> If this was ever solved, please let me know!  I know I've used previous versions with this working.
>
> Thanks!
>
> Aaron
>      _____
>
>  From: pedro [mailto:[email protected]]
> To: [email protected]
> Sent: Thu, 15 Sep 2005 05:08:51 -0600
> Subject: Re: [pureftpd] pure-uploadscript problem
>
> On 9/15/05, Tracer Bullet <[email protected]> wrote:
>> On Wed, 2005-09-14 at 02:08 +0200, pedro wrote:
>>> Hello,
>>>
>>> Im using the latest PureFTPd version (1.0.20) and I cannot get
>>> pure-uploadscript to work. I have compiled with
>>>
>>> ./configure --with-altlog --with-quotas --with-ftpwho --with-largefile
>>> --with-virtualhosts --with-virtualchroot --with-ratios
>>> --with-throttling --with-boring --with-uploadscript
>>> --with-language=spanish --with-language=catalan --with-language=dutch
>>> --with-language=english --with-mysql --with-paranoidmsg
>>> --cache-file=config.cache --without-inetd --without-pam --without-ldap
>>> --without-extauth --without-shadow --with-brokenrealpath
>>>
>>> Im running it as a standalone server with the following options:
>>>
>>> /usr/local/sbin/pure-ftpd -A -b -B -X -E -R -U 022:022 -u 999 -S 21 -l
>>> mysql:/usr/local/etc/pure-mysql.conf -O clf:/var/log/pureftpd.log -t
>>> 256:128 -o &
>>>
>>> and:
>>>
>>> /usr/local/sbin/pure-uploadscript -r -u 0 -g 0 /root/upload-script &
>>>
>>> Everything works great apart from pure-uploadscript. Does anyone know
>>> where to look for clues?
>>
>> The path to the script should be an argument to the -r flag. That is,
>> you should start pure-uploadscript like so:
>>
>> /usr/local/sbin/pure-uploadscript -u 0 -g 0 -r /root/upload-script &
>>
>
>
> Hello,
>
> I did run pure-uploadscript as you suggested after running pure-ftpd
> but still no luck. I also ran a strace like that:
>
> /usr/local/sbin/pure-ftpd -A -b -B -X -E -R -U 022:022 -u 999 -S 21 -l
> mysql:/usr/local/etc/pure-mysql.conf -O clf:/var/log/pureftpd.log -t
> 256:128 -o &
>
> strace /usr/local/sbin/pure-uploadscript -u 0 -g 0 -r
> /purescript/uploadscript.sh
>
> This is what strace shows after uploading test.txt:
>
> "\2", 1) = 1
> read(0, "m", 1) = 1
> read(0, "e", 1) = 1
> read(0, "l", 1) = 1
> read(0, "i", 1) = 1
> read(0, "m", 1) = 1
> read(0, "a", 1) = 1
> read(0, "t", 1) = 1
> read(0, "o", 1) = 1
> read(0, "\1", 1) = 1
> read(0, "/", 1) = 1
> read(0, "h", 1) = 1
> read(0, "o", 1) = 1
> read(0, "m", 1) = 1
> read(0, "e", 1) = 1
> read(0, "/", 1) = 1
> read(0, "m", 1) = 1
> read(0, "e", 1) = 1
> read(0, "l", 1) = 1
> read(0, "i", 1) = 1
> read(0, "m", 1) = 1
> read(0, "a", 1) = 1
> read(0, "t", 1) = 1
> read(0, "o", 1) = 1
> read(0, "_", 1) = 1
> read(0, "c", 1) = 1
> read(0, "o", 1) = 1
> read(0, "m", 1) = 1
> read(0, "/", 1) = 1
> read(0, "t", 1) = 1
> read(0, "e", 1) = 1
> read(0, "s", 1) = 1
> read(0, "t", 1) = 1
> read(0, ".", 1) = 1
> read(0, "t", 1) = 1
> read(0, "x", 1) = 1
> read(0, "t", 1) = 1
> read(0, "\0", 1) = 1
> lstat64("/home/melimato_com/test.txt", {st_mode=S_IFREG|0755,
> st_size=96, ...}) = 0
> clone(child_stack=0,
> flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD,
> child_tidptr=0xb7ef7b88) = 28806
> waitpid(28806, NULL, 0) = 28806
> --- SIGCHLD (Child exited) @ 0 (0) ---
> read(0,
>
>
> So I guess pure-uploadscript does run after a file has been uploaded,
> the problem is it either does not run my script or the script doesn't
> work.
> Can anyone see what I'm doing wrong?
>
> Thanks!
>
> Pedro.
>
> ---------------------------------------------------------------------
> To post a new message, e-mail: [email protected]
> To unsubscribe, e-mail: [email protected]
> For additional commands, e-mail: [email protected]
>
>
>
>

**************************************
Jon Daley
http://jon.limedaley.com/

When a dog bites a man that is not news,
but when a man bites a dog that is news.
-- Charles A. Dana

---------------------------------------------------------------------
To post a new message, e-mail: [email protected]
To unsubscribe, e-mail: [email protected]
For additional commands, e-mail: [email protected]