[quagga-users 14485] Re: Networks are not advertised with Quagga 1.1.0 when using route-map

Sorry fot this example - there is no shutdown in neigh section for 
testing :)

so please delete:  neighbor 192.168.0.2 shutdown
When try to reproduce problem.

Thanks
Paweł

W dniu 2016-11-02 o 06:38, Paweł Staszewski pisze:
>
> Hi
>
>
> To reproduce problem:
>
> router bgp 100
>  bgp router-id 192.168.0.1
>  network 192.168.0.0/24 route-map NET
>
>  neighbor 192.168.0.2 remote-as 64000
>  neighbor 192.168.0.2 description BGP-01
>  neighbor 192.168.0.2 shutdown
>  neighbor 192.168.0.2 next-hop-self
>  neighbor 192.168.0.2 soft-reconfiguration inbound
>  neighbor 192.168.0.2 route-map BGP-01-in in
>  neighbor 192.168.0.2 route-map BGP-01-out out
>
>
> ip community-list standard NET-out permit 1000:1
> ip community-list expanded own-comm permit 1000:.*
>
> route-map NET permit 10
>  set community 1000:1
>  set local-preference 1000
>
> route-map BGP-01-in permit 10
>  set comm-list own-comm delete
>  set community 1000:102
>  set local-preference 99
> !
> route-map BGP-01-out permit 10
>  match community NET-out
>  set comm-list own-comm delete
>
> After quagga restart (kill bgpd / zebra - start bgpd / zebra)
> No networks are advertised.
>
>
>
> Need to do :
> vtysh
> conf t
> router bgp 100
> network 192.168.0.0/24 route-map NET
>
> Then network 192.168.0.0/24 is advertised.
>
>
>
>
>
>
> -- 
>
>
>
> _______________________________________________
> Quagga-users mailing list
> Quagga-users-UOy77sIEA+cAd7ICUelF/[email protected]
> https://lists.quagga.net/mailman/listinfo/quagga-users


--

_______________________________________________
Quagga-users mailing list
Quagga-users-UOy77sIEA+cAd7ICUelF/[email protected]
https://lists.quagga.net/mailman/listinfo/quagga-users