[quagga-users 14501] Re: Networks are not advertised with Quagga 1.1.0 when using route-map

Look at this line:
...
neighbor 192.168.0.2 shutdown
...

On Fri, Ноември 4, 2016 11:47, Pawe? Staszewski wrote:
> W dniu 2016-11-02 o 16:58, Alexis Rosen pisze:
>> On Nov 2, 2016, at 1:38 AM, Pawe? Staszewski <[email protected]>
>> wrote:
>>> To reproduce problem:
>>>
>>> router bgp 100
>>>   bgp router-id 192.168.0.1
>>>   network 192.168.0.0/24 route-map NET
>>>
>>>   neighbor 192.168.0.2 remote-as 64000
>>>   neighbor 192.168.0.2 description BGP-01
>>>   neighbor 192.168.0.2 shutdown
>>>   neighbor 192.168.0.2 next-hop-self
>>>   neighbor 192.168.0.2 soft-reconfiguration inbound
>>>   neighbor 192.168.0.2 route-map BGP-01-in in
>>>   neighbor 192.168.0.2 route-map BGP-01-out out
>>>
>>>
>>> ip community-list standard NET-out permit 1000:1
>>> ip community-list expanded own-comm permit 1000:.*
>>>
>>> route-map NET permit 10
>>>   set community 1000:1
>>>   set local-preference 1000
>>> route-map BGP-01-in permit 10
>>>   set comm-list own-comm delete
>>>   set community 1000:102
>>>   set local-preference 99
>>> !
>>> route-map BGP-01-out permit 10
>>>   match community NET-out
>>>   set comm-list own-comm delete
>>>
>>> After quagga restart (kill bgpd / zebra - start bgpd / zebra)
>>> No networks are advertised.
>> This looks like an ordering problem. What happens if you move the
>> route-map block in the config file so it comes before the "router bgp"
>> declaration?
>>
>> Did you write this config manually or was it emitted in that order by
>> quagga?
>>
>> /a
>
> This is output ordered like from "wr term"
>
>
>
> --
> _______________________________________________
> Quagga-users mailing list
> [email protected]
> https://lists.quagga.net/mailman/listinfo/quagga-users
>



_______________________________________________
Quagga-users mailing list
[email protected]
https://lists.quagga.net/mailman/listinfo/quagga-users