[quagga-users 14559] Routes with interface inactive

Hello everybody,

I'm trying a pretty simple config using 3 routers, 2 ospf areas
and I want to propagate routes from one area to another. R1 is
connected directly with R2 (which is ABR) in area 0, and R2 is
connected through OpenVPN with R3 in area 1.

Everything works fine, except the fact that routes from R3 looks
like this:

#sh ip ro

[...]

O 172.24.172.0/24 [110/21] via 10.111.0.1, tun0 inactive,
03:25:15

O 172.24.200.0/24 [110/21] via 10.111.0.1, tun0 inactive,
03:25:15

O 172.24.255.0/24 [110/21] via 10.111.0.1, tun0 inactive,
03:25:15

O 192.168.1.0/24 [110/20] via 10.111.0.1, tun0 inactive,
03:29:19

O 192.168.2.0/24 [110/21] via 10.111.0.1, tun0 inactive,
03:25:15

O 192.168.10.0/24 [110/1] via 10.111.0.1, tun0 inactive,
03:25:14

O 192.168.11.0/24 [110/1] via 10.111.0.1, tun0 inactive,
03:25:14

My problem is that these routes aren't inserted in kernel, I
guess because tun0 appears inactive. But tun0 from R3 is active
and participate in ospf process, it is connected with tun0 from
R2 (OpenVPN interfaces).

I don't want to make this message too long with unnecessary
information, so if you need more details about some things, I
will wrote them. One simple question is what "tun0 inactive"
message means and at which parameters should I look to
understand where could be a misconfiguration.

P.S. I have tested identical configuration with 3 virtual
machines and I didn't see this problem.

Thank you for your time.

Best regards,

--
Catalin Bucur

_______________________________________________
Quagga-users mailing list
Quagga-users-UOy77sIEA+cAd7ICUelF/[email protected]
https://lists.quagga.net/mailman/listinfo/quagga-users